Nervo19's 89 4Runner 22RE Slow Rehab
#61
Registered User
iTrader: (8)
Join Date: May 2011
Location: Southeast Virginia
Posts: 1,517
Likes: 0
Received 353 Likes
on
219 Posts
Ah okay, kind of close. Saw your profile picture and thought you might be by Virginia Beach. Well if you ever need an extra hand let me know. I love working on these trucks but my own budget holds me back. So working on other's trucks scratches my itch without costing me money. Used to have a bunch of spare parts too but I'm pretty close to selling off what I don't need.
#63
Registered User
Thread Starter
The Frost King in the rear is still going strong. It's been down at least two years. Right now it's open and I can see it because I haven't put back the plastic panels. It's sticking fine. I used one roll and I had a lot left over. It was sold in the weather stripping area at Home Depot.
Last edited by Nervo19; 02-26-2017 at 05:35 PM.
#64
Registered User
Thread Starter
Here's a recent picture. Truck made it to the beach and back this summer. 180 miles each way.
#65
Registered User
Beautiful!
#66
Super Moderator
Staff
iTrader: (1)
Join Date: Aug 2008
Location: Anderson Missouri
Posts: 11,787
Likes: 0
Received 25 Likes
on
22 Posts
You have brought this truck a long ways from where it was at. It is a great looking truck now. Also having one to make it on a long trip and back is some bragging rights. Great job on it.
#67
Registered User
Thread Starter
This is sun rise in Kill Devil Hills, NC
#68
Registered User
Thread Starter
Since last summer we have done the Zuk mod and cranked the front. My son recently added a CB radio and a dorky magnetic antenna that can be taken off easily. We took it to the Outer Banks last week and posed it at the VA/NC state line. The fence that runs into the ocean is the state line. The VA side is a sanctuary so no driving on the beach It was cold and few people were there. Then we had a huge storm.
#69
Registered User
Looks great!
#70
Registered User
Thread Starter
Back home getting a bath.
#71
Registered User
Man, I wish I could drive on the beach like that! Ours are so tightly restricted. May have to come to NC.
#72
Registered User
Nervo - real beauty you have there. Back on page 3 of this thread I see a fire extinguisher on pass floorboard, do you have some contraption for mounting it there or is it just laying? If mounted, does it slide with the seat? Thinking of places and ways to mount an extinguisher in mine.
#73
Registered User
Thread Starter
Nervo - real beauty you have there. Back on page 3 of this thread I see a fire extinguisher on pass floorboard, do you have some contraption for mounting it there or is it just laying? If mounted, does it slide with the seat? Thinking of places and ways to mount an extinguisher in mine.
#74
Registered User
Thank you Nervo...that's a nice fire extinguisher pouch..
#75
The rusty spots you repaired're perfect. The crystal lights look good also, did you install the same style in the tail lights?
#76
Registered User
Thread Starter
#78
Registered User
Thread Starter
Not much happening but I wanted to show off these cup holders. They are metal and work great. A little expensive but they are a permanent improvement. This is how they look in my 4Runner: https://www.ebay.com/itm/Toyota-4Run...NYoSj-&vxp=mtr
#79
Contributing Member
Wow, that is pricey, but it really does look nice and that it bolts in is a nice touch.
#80
Registered User
Those look really nice. Back in the day, my dad kept a stainless steel coozie there with heavy duty velcro