Differential and accessorie question
#1
Registered User
Thread Starter
Join Date: Jul 2017
Location: Tucson, PNW soon
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Differential and accessorie question
Update: I've been helped and the parts will be here this week. Thanks to Millball and yotatech forums. Glad to join an active Toyota thread-
92.4runner.5speed.broken!
So, as seen in the pictures, I broke my differential, bent the cross member mount for it, also the spacer for the front differential rear mount, that was a part of my pro comp lift kit.
I cannot find a new front diff cover, and was going to see if a local welder could fix my cross member, but also have no clue where to get that spacer!!!
first post here, excited to be here. Sure I am missing some questions but will edit soon! Thanks guys!
92.4runner.5speed.broken!
So, as seen in the pictures, I broke my differential, bent the cross member mount for it, also the spacer for the front differential rear mount, that was a part of my pro comp lift kit.
I cannot find a new front diff cover, and was going to see if a local welder could fix my cross member, but also have no clue where to get that spacer!!!
first post here, excited to be here. Sure I am missing some questions but will edit soon! Thanks guys!
Last edited by Bubbazeus; 07-09-2017 at 12:13 PM.
#3
Registered User
Thread Starter
Join Date: Jul 2017
Location: Tucson, PNW soon
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I live in Tucson but am broken down in Flagstaff
Willing to pay for the parts and possibly have them shipped here if you were willing! Let me know, going to go to the U Pull It up here today, will update later!
Willing to pay for the parts and possibly have them shipped here if you were willing! Let me know, going to go to the U Pull It up here today, will update later!
Last edited by Bubbazeus; 07-09-2017 at 07:26 AM.
#6
Registered User
Thread Starter
Join Date: Jul 2017
Location: Tucson, PNW soon
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Those will be just right! Also, off of my differentials right side, where the cv attaches to the flange, it is tweaked a bit, I was told that it should be safe with how the axle/bearings move, but feel skeptical about it. Thoughts? Just don't want to replace that part if the differential is no good.
#7
Registered User
Those will be just right! Also, off of my differentials right side, where the cv attaches to the flange, it is tweaked a bit, I was told that it should be safe with how the axle/bearings move, but feel skeptical about it. Thoughts? Just don't want to replace that part if the differential is no good.
Trending Topics
#11
Registered User
Thread Starter
Join Date: Jul 2017
Location: Tucson, PNW soon
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Right beneath the drain bolt, to the right, there is spacing for the flange on the ADD actuators electrical connection point. Minor difference, but with the new plate, the actuator cannot be mounted.