FS[MidWest]: brush guard / corner lights / turn signals / tail lights / LH front mudflap
#1
Registered User
Thread Starter
brush guard / corner lights / turn signals / tail lights / LH front mudflap
selling bumper turn signal / corner marker / tail lights. white corners are for a 87 2wd, slightly different cosmetic shape
Added grille and gauge cluster bezel
$30 for the grille
$40 for the bezel (the top one in the pic)
screws are for the tail lights
If you're interested let me know, I'll be posting on ebay soon if I don't hear from anyone on here.
Cosmetic scratches only, everything works, might be missing a bulb or 2, the chrome ones are brand new only used for a week. I did swap the connectors, and then swap back, so it's soldered and heat shrunk
Note the tail lights have chrome trim
Would do the whole set of oranges for $75 plus ship
$40 plus ship forjust the tails or just the clear corners
$25 plus ship for just the turn signals ororange corners
or make me an offer on a different combo, looking to clear out space
Also have a mudflap from a 1986 4runner (not 100% sure that's what it was on originally) front left hand side in great shape none of the holes ripped out, and a diamond plate mounting plate for it. $30 OBO
and a brush guard. wire brush and paint and it's good as new, tow hooks do not come with but the cheap walmart lights do if you want them. One has a broken lens, but they both work. I could even be persuaded to pull the relay out with them as well.
lets say $100 OBO on the brush guard. I'm in the greater Fort Wayne, Indiana area. if you really want to pay to ship the thing we can.
Added grille and gauge cluster bezel
$30 for the grille
$40 for the bezel (the top one in the pic)
screws are for the tail lights
If you're interested let me know, I'll be posting on ebay soon if I don't hear from anyone on here.
Cosmetic scratches only, everything works, might be missing a bulb or 2, the chrome ones are brand new only used for a week. I did swap the connectors, and then swap back, so it's soldered and heat shrunk
Would do the whole set of oranges for $75 plus ship
$40 plus ship for
$25 plus ship for just the turn signals or
or make me an offer on a different combo, looking to clear out space
Also have a mudflap from a 1986 4runner (not 100% sure that's what it was on originally) front left hand side in great shape none of the holes ripped out, and a diamond plate mounting plate for it. $30 OBO
and a brush guard. wire brush and paint and it's good as new, tow hooks do not come with but the cheap walmart lights do if you want them. One has a broken lens, but they both work. I could even be persuaded to pull the relay out with them as well.
lets say $100 OBO on the brush guard. I'm in the greater Fort Wayne, Indiana area. if you really want to pay to ship the thing we can.
Last edited by magnet18; 05-16-2017 at 07:18 PM.
#5
Registered User
iTrader: (1)
Join Date: Jan 2015
Location: Fairfax Station, VA 22039
Posts: 250
Likes: 0
Received 1 Like
on
1 Post
Any pics of the brush guard installed on the truck? Where does it mount to?
what condition are the clear/white corners in? You mentioned it from a 2wd, but should also fit a 4wd i assume?
thanks
what condition are the clear/white corners in? You mentioned it from a 2wd, but should also fit a 4wd i assume?
thanks
#6
Registered User
Thread Starter
Here is what the clear corners came from
http://www.ebay.com/itm/1987-1988-TOYOTA-PICKUP-2WD-RED-CLEAR-TAIL-LIGHTS-CLEAR-CORNER-BUMPER-LIGHTS/401229959038?_trksid=p2047675.c100011.m1850&_trkpa rms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3 D40130%26meid%3Da7bcf276d7484cf3ad04a5168304a4cc%2 6pid%3D100011%26rk%3D2%26rkt%3D5%26sd%3D4006591640 33
The will FIT fine, but I guess 87-88 2WD had a slightly different cosmetic shape? notice the extra bump at the bottom.
EDIT: They are in perfect shape. I did a connector swap/swap back so they will be soldered and shrinkwrapped, you'll never know. or use your old connector.
I put them on for a couple weeks until I ordered the ones the right shape. It's just bugged me is all, noone else ever noticed.
Here is a pic of the brush guard installed
https://www.yotatech.com/forums/f121.../#post52359702
Install is really simple, 2 bolts into the bumper (holes are there for all bumpers) and 4 bolts up under the valence. should bolt right onto any 1st/2nd gen truck / 1st gen 4runner
http://www.ebay.com/itm/1987-1988-TOYOTA-PICKUP-2WD-RED-CLEAR-TAIL-LIGHTS-CLEAR-CORNER-BUMPER-LIGHTS/401229959038?_trksid=p2047675.c100011.m1850&_trkpa rms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3 D40130%26meid%3Da7bcf276d7484cf3ad04a5168304a4cc%2 6pid%3D100011%26rk%3D2%26rkt%3D5%26sd%3D4006591640 33
The will FIT fine, but I guess 87-88 2WD had a slightly different cosmetic shape? notice the extra bump at the bottom.
EDIT: They are in perfect shape. I did a connector swap/swap back so they will be soldered and shrinkwrapped, you'll never know. or use your old connector.
I put them on for a couple weeks until I ordered the ones the right shape. It's just bugged me is all, noone else ever noticed.
Here is a pic of the brush guard installed
https://www.yotatech.com/forums/f121.../#post52359702
Install is really simple, 2 bolts into the bumper (holes are there for all bumpers) and 4 bolts up under the valence. should bolt right onto any 1st/2nd gen truck / 1st gen 4runner
Last edited by magnet18; 04-07-2017 at 08:20 PM.
Trending Topics
#8
Registered User
Thread Starter
#15
Registered User
Thread Starter
Orange corners sold
Got the clear corners up on ebay, it'll cost $10ish to ship make an offer on here for at least $20 and they're yours
everything else is still up for grabs
Got the clear corners up on ebay, it'll cost $10ish to ship make an offer on here for at least $20 and they're yours
everything else is still up for grabs