Working on a combination switch connector
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: N of Okechobee Florida
Posts: 1,002
Likes: 0
Received 4 Likes
on
4 Posts
Working on a combination switch connector
I'm replacing some electrical components on my combination switch with some other good ones. The problem that I'm having is removing the wires from the connector. Anyone have an idea for the tool to help with this? Tony
#6
If you do not want to fabricate, you can purchase. http://www.cycleterminal.com/crimp-t...ExtractionTool
The site also has some cutaway pictures on removing terminals and has the round pin extraction tools. http://www.cycleterminal.com/termina...procedure.html
I purchased replacement injector connectors, terminals, the crimper tool and other sensor connectors from this site
The site also has some cutaway pictures on removing terminals and has the round pin extraction tools. http://www.cycleterminal.com/termina...procedure.html
I purchased replacement injector connectors, terminals, the crimper tool and other sensor connectors from this site