1st Generation Toyota 4Runner's.....
#101
Registered User
Join Date: Aug 2014
Location: South Carolina
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
1984 4Runner Project
Weber 32/36
Magnaflow cat back
New stock exhaust manifold and studs
150K miles one owner
Double din stereo
Prepping for 22R rebuild with goodies
and suspension
Magnaflow cat back
New stock exhaust manifold and studs
150K miles one owner
Double din stereo
Prepping for 22R rebuild with goodies
and suspension
#103
Registered User
Join Date: Aug 2014
Location: South Carolina
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
SR5 5 speed by the way
Forgot this vital info on above post. I am new to this forum but I believe I have read almost everything on line for the first gen Runners. I am about to get out of the military and head back to SC. I'll have a garage, tools and time once down. I am pulling the 22r and do a full rebuild. OME suspension is what I'm thinking with gears (still debating 4:86 or 5:29) Only want 31 or 32s for trail. E locker front and Detroit or such for rear. I want a somewhat street/trail rig. Not DD. I am open to any suggestions. Thanks
#105
Registered User
Join Date: Jan 2015
Location: Blanchard OK
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Meet Black Betty
I am new to forum. I have had Toyotas all my life and have never been in a place for this expensive of a toy... Until now!!! Black Betty has only been in my life for about a week. Seems to be unmolested and bare bone stock aside from Cold air intake.
1989 2.4 EFI 22RE 5Spd.
I have 99 TJ springs on the way for Zuk mod.
Next BJ spacers for front and some tires with tread on them
1989 2.4 EFI 22RE 5Spd.
I have 99 TJ springs on the way for Zuk mod.
Next BJ spacers for front and some tires with tread on them
#106
Registered User
iTrader: (2)
I am new to forum. I have had Toyotas all my life and have never been in a place for this expensive of a toy... Until now!!! Black Betty has only been in my life for about a week. Seems to be unmolested and bare bone stock aside from Cold air intake.
1989 2.4 EFI 22RE 5Spd.
I have 99 TJ springs on the way for Zuk mod.
Next BJ spacers for front and some tires with tread on them
1989 2.4 EFI 22RE 5Spd.
I have 99 TJ springs on the way for Zuk mod.
Next BJ spacers for front and some tires with tread on them
#107
Registered User
Been a while
Went muddin, wifes first time and tore it up.
Overheated driving home = expected
cracked main seal cover and lots of pressure washing since.
Attempted to repair that cover and oil leak but couldn't get the crank bolt loose. Broke 2 breaker bars and tried impact wrench along with draining the battery (starter bump method) Needless to say it was a costly trip but the Wife had fun so oh well, it's only money.
Overheated driving home = expected
cracked main seal cover and lots of pressure washing since.
Attempted to repair that cover and oil leak but couldn't get the crank bolt loose. Broke 2 breaker bars and tried impact wrench along with draining the battery (starter bump method) Needless to say it was a costly trip but the Wife had fun so oh well, it's only money.
#109
First toyota 4runner
Buying this gem from a buddy of mine in two weeks. Has alot of stuff done to it already but needs some interior work but the truck is rust free and runs great! Will post more pictures later this is all I have right now
#112
Registered User
Join Date: Oct 2016
Location: California
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Wow, there's a lot of really nice 1st gen 4runners in this thread. Gives me ideas for mine. I've got an 85 runner that has 248,238 miles that I'm rebuilding and going to turn into a trail cruiser and camping truck. Can't wait till I can get mine running reliably so I can hit the trails.
#113
Registered User
Beautiful 1st gen at insurance auction,...
I've been watching for a clean 1st Gen for a while (not a priority, more of a hobby). I've had 2 1st gens (back in college) and just sold my 3rd Gen. I happened to see this one but it is too far away... $1,100 to ship it! :/ Someone really needs to buy it and do a swap.
https://www.copart.com/lot/38044566/...edLot=38044566
Being sold for storage fees and damage is mechanical. With 380k I'd bet it is on 2nd or 3rd head gasket and is begging for a new engine, maybe a 4.0
https://www.copart.com/lot/38044566/...edLot=38044566
Being sold for storage fees and damage is mechanical. With 380k I'd bet it is on 2nd or 3rd head gasket and is begging for a new engine, maybe a 4.0
#114
Registered User
Join Date: Oct 2012
Location: Brooklyn , NY
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
89 SR5 4Runner 3.0 on going resto
i bought this truck in september and have slowly been getting it sorted out .
im going to sell it when im done , for now though the body , paint and suspension with new tires have been redone.
more to come
im going to sell it when im done , for now though the body , paint and suspension with new tires have been redone.
more to come
#117
#118
Registered User
My best girl.
Here's my 89 SR5 V6. I had a big crush on my now wife back in college but way before she would give me the time of day. One day she called me and asked if I would come look at her cousin's POS car because it wouldn't run. I went over and fell in love a second time. This thing was the POS she was talking about. Anyway, I fixed an alternator wire and begged her cousin to call me if her dad ever wanted to sell it.
12 years later and after her uncle had passed away unexpectedly, my wife's aunt called and said that she was having the wrecking yard come pick up the old 4Runner and that she had just heard about my plea to buy it all those years ago. I came running and gave her the $200 she asked for it plus another $100 for thinking about me.
Got it running on a couple cylinders a few days later, threw it in gear and drove it home like Rooster Cogburn on Little Blackie. A year and probably $1000 later I had her back up to snuff.
Just like my wife, I loved her the first time I saw her and she was worth the wait and the trouble. Here's some before and after pics.
89 SR5 V6, 215,000 miles.
Rear Spring Upgrade and 6" Shackles with BJS
New Injectors and Smog Delete
Homemade tube bumper valence made out of an 88 model roll bar from my parts truck.
32-11.50 R15 I traded some machine work for.
12 years later and after her uncle had passed away unexpectedly, my wife's aunt called and said that she was having the wrecking yard come pick up the old 4Runner and that she had just heard about my plea to buy it all those years ago. I came running and gave her the $200 she asked for it plus another $100 for thinking about me.
Got it running on a couple cylinders a few days later, threw it in gear and drove it home like Rooster Cogburn on Little Blackie. A year and probably $1000 later I had her back up to snuff.
Just like my wife, I loved her the first time I saw her and she was worth the wait and the trouble. Here's some before and after pics.
89 SR5 V6, 215,000 miles.
Rear Spring Upgrade and 6" Shackles with BJS
New Injectors and Smog Delete
Homemade tube bumper valence made out of an 88 model roll bar from my parts truck.
32-11.50 R15 I traded some machine work for.
#119
Registered User
iTrader: (1)
Tried to do the timeline thing but my mobile skills need work. Can't seem to get spaces between pics for comments and they were so witty garage shot is rig on 63's just installed. flopped rig is not mine but a good reminder IFS does not flex like SAS. Rig was IFS when white, tan paint was a cheap solution to a graffiti problem. Me in the mud with winch not working is a reminder to check your rig before showing off and no ATs are not as good as MT no matter what a web wheeler says and not much improvement in MPGs.
#120
Registered User
iTrader: (-1)
PS. Type into the little box when your on the photo attachment dialog "comments about this photo" or what ever it says and the forum app will add the text below in italics which you can later edit I'd needed.