'86 fender trimming?
#61
Registered User
Thread Starter
Join Date: Mar 2016
Location: Canada, British Columbia
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Also, out of curiosity. What exactly is this?
https://www.dropbox.com/s/07x200kql7...%20PM.jpg?dl=0
https://www.dropbox.com/s/609jsir2wq...%20PM.jpg?dl=0
https://www.dropbox.com/s/2n0x31m1ov...%20PM.jpg?dl=0
https://www.dropbox.com/s/m1nra9st56...%20PM.jpg?dl=0
https://www.dropbox.com/s/tdmls3snuf...%20PM.jpg?dl=0
https://www.dropbox.com/s/07x200kql7...%20PM.jpg?dl=0
https://www.dropbox.com/s/609jsir2wq...%20PM.jpg?dl=0
https://www.dropbox.com/s/2n0x31m1ov...%20PM.jpg?dl=0
https://www.dropbox.com/s/m1nra9st56...%20PM.jpg?dl=0
https://www.dropbox.com/s/tdmls3snuf...%20PM.jpg?dl=0
#65
Registered User
Thread Starter
Join Date: Mar 2016
Location: Canada, British Columbia
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Guess I should post an update?
Havent had a lot of time to work on it. Grade 12's a bitch.
Anyways, I've got the 2 rear fenders cut. Just have to do a bit of touching up because I don't think it's very straight.
https://www.dropbox.com/s/fbah3miyb1...%20AM.jpg?dl=0
https://www.dropbox.com/s/1g9qnxq88s...%20AM.jpg?dl=0
I am going to try and finish up the front 2 sometime today. As some of had said, it wont make full turn without hammering down that lip
https://www.dropbox.com/s/iac0d1wncr...%20AM.jpg?dl=0
But will that be enough clearance? If I hit say a bump, wouldnt the tire come up a bit and hit the side?
Havent had a lot of time to work on it. Grade 12's a bitch.
Anyways, I've got the 2 rear fenders cut. Just have to do a bit of touching up because I don't think it's very straight.
https://www.dropbox.com/s/fbah3miyb1...%20AM.jpg?dl=0
https://www.dropbox.com/s/1g9qnxq88s...%20AM.jpg?dl=0
I am going to try and finish up the front 2 sometime today. As some of had said, it wont make full turn without hammering down that lip
https://www.dropbox.com/s/iac0d1wncr...%20AM.jpg?dl=0
But will that be enough clearance? If I hit say a bump, wouldnt the tire come up a bit and hit the side?
#67
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
Redrunner3g
95.5-2004 Tacomas & 96-2002 4Runners
2
01-30-2016 10:15 AM
Kj94runner
86-95 Trucks & 4Runners
1
01-27-2016 12:01 AM