Anyone do the "Big 3" upgrade?
#21
Contributing Member
The best solution to keep the power in your system from sagging is to add something called a Power Stiffening Capacitor or stiffening cap. Capacitors allow for a huge amount of energy to be released in a very short amount of time. Lightening in a bottle is a good analogy.
Depending on the size of your amplifier you should look for a 500 microfarad capacitor or larger. It's hard to get a capacitor that is too big. Your wallet will stop you from doing that long before the size of the capacitor becomes an issue. If you go with a 1 farad capacitor (1000 microfarads) you will have a large enough capacitor to cover 99% of the audio systems in the market.
When looking for a capacitor you should look at the discharge rate of the capacitor. The lower the number the better. It means that it takes less time to deliver the power. For example a 5 millisecond discharge is fast.
When you wire the capacitor in the best place to install it is near the amplifier. If you do install it next to the battery that is still OK just not ideal. You want to wire the capacitor in parallel. That means you connect the positive wire from the terminal to the positive terminal of the capacitor and then to the positive of the amplifier. The negatives are the same, Neg of batt to neg of the cap and then neg of your amplifier.
I'd also like to make a quick note that larger cables will allow for a larger amount of current to be delivered but if you only have so much power to begin with then you still only get what your alternator and battery can deliver.
#24
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
06-13-2022 07:40 PM
sonorn67
84-85 Trucks & 4Runners
3
09-19-2015 05:39 PM