New rear bumper
#1
New rear bumper
I couldn't find what I was looking for so I build one, hitch, winch mount, swing out for spare and hi-lift. Still have a couple things to finish it but I'll run like this for a while.
#3
Yep, nice one indeed! PO had after-market bumper installed on mine and it blocks access to spare tire lift mechanism, so looking for solutions. hope to find one local to So Cal.
Last edited by RAD4Runner; 11-06-2012 at 01:56 PM.
#6
Registered User
Join Date: Oct 2012
Location: Prestonsburg Ky
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Man, that thing is nice. I'll take one please. Ive been looking all over the internet and local and cant find any bumper that I like for a 94 truck.
Last edited by creedua; 11-06-2012 at 02:41 PM.
Trending Topics
#9
thanx. I didn't snap many but here are a couple. It's 3/16ths cut from plate using a Milwaukee saw. Lots of little pieces. The hinge is a 3/4" bolt with 3"x1" seemless w/sleeves from home depot
top view
horizontal view
bottom view
top view
horizontal view
bottom view
#10
Hinge. drilled bolt head for safety wire. Nut is welded inside bumper
swingout. Got sloppy when marking/drilling holes. Main beam 2x2x1/8, uprights 1.5x1.5x1/8
warped the swingout pretty bad when welding the foot for the jack and had to cut the main beam and weld in back together
swingout. Got sloppy when marking/drilling holes. Main beam 2x2x1/8, uprights 1.5x1.5x1/8
warped the swingout pretty bad when welding the foot for the jack and had to cut the main beam and weld in back together
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM