Home made co2 tank holder,bracket ,carrier thing..
#1
Home made co2 tank holder,bracket ,carrier thing..
I bought a 15lb co2 tank and a fixed 100psi regulator off ebay , I decided to go ahead a build a mount to mount it to the roll bar . Heres what I did today... I also put a little primer on the tire carrier I am buliding ...
Does anybody know off hand the size of the bolts that go on the roll bar for the first gens ..
The backing part is 1/4 "
the Bottom is 3/16 "
the little braces are 1/8 "
The pic shows the tank I have now , its a 20lb tank .. When I went to fill the 15lber the welding shop did not have co2 to fill my tank so the guy just gave me this one that was filled already and just paid the fill up $24.50.
I want mine back though this one is to big and bulky..
Does anybody know off hand the size of the bolts that go on the roll bar for the first gens ..
The backing part is 1/4 "
the Bottom is 3/16 "
the little braces are 1/8 "
The pic shows the tank I have now , its a 20lb tank .. When I went to fill the 15lber the welding shop did not have co2 to fill my tank so the guy just gave me this one that was filled already and just paid the fill up $24.50.
I want mine back though this one is to big and bulky..
Last edited by RMA; 12-19-2009 at 04:10 PM.
#4
Yea the seat belt holes ones , Thanks !!
I also need to find some kind of strap to hold the tank to the bracket.. I havnet figured that part out yet
Last edited by RMA; 11-29-2009 at 06:25 PM.
#5
So I thought it would be a good idea to post a pic of the finished product.
I also went ahead and glued some strips of rubber like stormin suggested.
used 1/4-20 stainless bolts for the metal straps.
I could not find the 7/16-20 flat head bolts in singles anywhere so I just cut a 1" hole and welded some plate to the back of the bracket so the bolts wouldnt get in the way of the tank.
I also went ahead and glued some strips of rubber like stormin suggested.
used 1/4-20 stainless bolts for the metal straps.
I could not find the 7/16-20 flat head bolts in singles anywhere so I just cut a 1" hole and welded some plate to the back of the bracket so the bolts wouldnt get in the way of the tank.
Trending Topics
#8
Yea Thats what she said. When I get the 15lb tank back I will just change the straps .. and thanks !
THanks !! It is pretty solid doesnt move one tiny bit..
Now I just have to finish my bumper, finding a used cheap tubing bender is not easy.
THanks !! It is pretty solid doesnt move one tiny bit..
Now I just have to finish my bumper, finding a used cheap tubing bender is not easy.
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM
whereAreMyPants
86-95 Trucks & 4Runners
2
07-22-2015 03:32 AM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM