3rd gen rear bumper build
#21
Registered User
Join Date: Nov 2003
Location: Kentucky
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
If you're talking about a REAR tube bumper for a 3rd generation, then keep me in the loop. I'd rather have a tube style to go with my front tube bumper and tube sliders. However, I still haven't seen one that I like.
#28
Registered User
Join Date: Oct 2005
Location: New Jersey
Posts: 1,166
Likes: 0
Received 0 Likes
on
0 Posts
aweosme dude! I like it a lot. If you ever do decide to start building and seling them, hit me up, I have 2 factory Toyota hitches sitting in my garge, and I would love to have one made into a bumper. Awesome again!
#30
Registered User
Join Date: Nov 2005
Location: SouthWest Littleton, Colorado
Posts: 1,205
Likes: 0
Received 1 Like
on
1 Post
Mossy
It looks like you flipped the whole hitch upsidedown. Is this true? I was thinking of the same thing but have it poke thru the stock bumper. I would love to gain the 5" that the stock hitch takes. Mine would not work because the frame plates are too wide and the receiver is dropped under the main tube. What brand and model is your hitch? It looks like the bumper is as high as your frame rails now. I loke the concept of building off the hitch. I tow and need a certified hitch (or at least proven) Great job.
Do you want to make another one? I'm also very interested in the one BruceTS is talking about.
https://www.yotatech.com/forums/f2/new-brucets-style-3rd-gen-4runner-rear-bumpers-55776/
It looks like you flipped the whole hitch upsidedown. Is this true? I was thinking of the same thing but have it poke thru the stock bumper. I would love to gain the 5" that the stock hitch takes. Mine would not work because the frame plates are too wide and the receiver is dropped under the main tube. What brand and model is your hitch? It looks like the bumper is as high as your frame rails now. I loke the concept of building off the hitch. I tow and need a certified hitch (or at least proven) Great job.
Do you want to make another one? I'm also very interested in the one BruceTS is talking about.
https://www.yotatech.com/forums/f2/new-brucets-style-3rd-gen-4runner-rear-bumpers-55776/
#31
its a reese hitch reciever, it fit between the frame rails, but the only thing I had to do was notch out the vertical plates on the reciever to clear the crossmember
#32
Registered User
Join Date: Apr 2012
Location: NOR CAL
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
This is the bumper i want. I have a 95 4runner any suggestions MossyRocks? And if you dont mind could you tell me what materials and what size square tubing you used?
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM