Washington Wet Wheelers
#361
88 4runner SR5 3.0V6 5spd. Put a 4" trail master diff bracket lift with the Zuk mod. Bald a$$ 33×12.5 Baja claws. Stock gears and diffs. It's my poorX4. More plans than time or money.
#362
#363
#364
LOL right on brother. Well I'm Andrew I started the club and do all of our event planning. We are a free club without dues. Just a laid back bunch of guys who love getting out and getting our trucks dirty. We will be having a run here before the month is over to close out the summer. We are still deciding where to go. One of the members suggested Tahuya. Have you been there?
#365
LOL right on brother. Well I'm Andrew I started the club and do all of our event planning. We are a free club without dues. Just a laid back bunch of guys who love getting out and getting our trucks dirty. We will be having a run here before the month is over to close out the summer. We are still deciding where to go. One of the members suggested Tahuya. Have you been there?
#366
We went to Evans two trips back and the more stock/IFS guys had a hard time with the more difficult trails. It was still a good time and great camping. I would be down to go again. I'll put out some feelers to the guys. Most of them monitor this thread though and will likely chime in....right guys....
#367
We went to Evans two trips back and the more stock/IFS guys had a hard time with the more difficult trails. It was still a good time and great camping. I would be down to go again. I'll put out some feelers to the guys. Most of them monitor this thread though and will likely chime in....right guys....
#368
#369
#370
#372
#373
We went to Evans two trips back and the more stock/IFS guys had a hard time with the more difficult trails. It was still a good time and great camping. I would be down to go again. I'll put out some feelers to the guys. Most of them monitor this thread though and will likely chime in....right guys....
#374
Yeah, yeah, I'm still lurking around here . I'm more up for a day trip, that's why I suggested Tahuya. I'd be down to do Walker again too now that I have tires that have tread, lol. Probably not quite as muddy as it was last time too. If it's gonna be an over-nighter somewhere else I can try to make that work.
#375
#376
Do you think we should do Evans again or wait until trucks are a little more built? I had a blast personally on the trails we hit. I would totally be down to close the summer down with a Tahuya or Evans trip. Even a walker would be fun. We still haven't done the Top loops. I'm getting some work done to my truck this weekend (brakes). Then I'm getting this put on my truck before the end of the month We should get a beer Brendan. I have to go into Seattle sometime this week for some other ˟˟˟˟ anyways. When are you free?
I get off work at 2:00 M-F. Gonna be heading out camping straight from work this Friday though, but hit me up whenever.
#378
Thank you. Yotatech is a great site. I'm lost when it comes to electrical, and am having a hell of a time. I just bought a used tailgate for my 4runner, supposedly good motor for the window. Plugged everything in and nothing happens. Is there supposed to be power going to the window switch in the center console. Using a light tester with the key on I can't find a hot wire. Can get a hot wire off my ignition so in getting g a good ground. It doesn't make any noise when I hit the switch. Any suggestions. I've trolled around a few threads, top bolts are in to engage the switch, plug in the corner is hooked up. Wiper is all the way up but it been mashed up a bit.
#379
Thank you. Yotatech is a great site. I'm lost when it comes to electrical, and am having a hell of a time. I just bought a used tailgate for my 4runner, supposedly good motor for the window. Plugged everything in and nothing happens. Is there supposed to be power going to the window switch in the center console. Using a light tester with the key on I can't find a hot wire. Can get a hot wire off my ignition so in getting g a good ground. It doesn't make any noise when I hit the switch. Any suggestions. I've trolled around a few threads, top bolts are in to engage the switch, plug in the corner is hooked up. Wiper is all the way up but it been mashed up a bit.