Rear suspension
08-17-2005 | 03:20 PM
#1
Thread Starter
Contributing Member
Joined: Jun 2005
Posts: 1,031
Likes: 0
From: Bellevue, Washington
Rear suspension
i have an 02 tacoma 4x4 v6 and i put 1.5 inch cornfed spacers in the front and now its higher than the front, i need a way to get the back up 1 to 1.25 inchs, i was thinking steel blocks or shackles but i can't find any. any ideas?????
08-17-2005 | 04:01 PM
#3
Contributing Member
Joined: Mar 2005
Posts: 1,010
Likes: 0
From: San Jose, CA
www.4crawler.com for custom shackles
08-17-2005 | 06:35 PM
#4
For 1.25" if lift, you would want shackles about 2-2.5" longer than stock:
- http://www.4crawler.com/4x4/ForSale/Shackles.shtml#FAQ4
No problem with that in a Tacoma-style shackle:
4Crawler Offroad can also make custom height lift blocks, up to 1" tall in steel, taller in billet aluminum:
http://www.4crawler.com/4x4/ForSale/Shims.shtml
- http://www.4crawler.com/4x4/ForSale/Shackles.shtml#FAQ4
No problem with that in a Tacoma-style shackle:
4Crawler Offroad can also make custom height lift blocks, up to 1" tall in steel, taller in billet aluminum:
http://www.4crawler.com/4x4/ForSale/Shims.shtml
Last edited by 4Crawler; 08-17-2005 at 06:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 02:51 PM
Yotadawgjr
95.5-2004 Tacomas & 96-2002 4Runners
10
08-23-2015 11:51 AM
coffey50
Offroad Tech
17
07-28-2015 11:55 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 01:15 PM
