3rd generation pics of lifts/tires
#82
Registered User
Thread Starter
Join Date: Feb 2005
Location: HARFORD COUNTY, Maryland
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
Thanks.
so far this is what I found:
Tirepackage.com 1,029.82 for package. Tires 167.99 each.
4Wheelparts 1,095.00 for package. Tires 168.99 each.
Tirerack.com/barretire.com doesnt carry RockCrawler wheels. Tires are 166.00 each.
so far this is what I found:
Tirepackage.com 1,029.82 for package. Tires 167.99 each.
4Wheelparts 1,095.00 for package. Tires 168.99 each.
Tirerack.com/barretire.com doesnt carry RockCrawler wheels. Tires are 166.00 each.
Last edited by ROOFGOOF; 12-02-2005 at 01:54 PM.
#84
Registered User
Thread Starter
Join Date: Feb 2005
Location: HARFORD COUNTY, Maryland
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I want to go with some RockCrawlers since they are relatively cheap compared to other wheels. If my factory Limited wheels were wider with 4inch backspacing I would be set
Sams club 175.88 each.
LOOK AT THIS THREAD I STARTED REGARDING FURTHER PRICES OF TIRES.
https://www.yotatech.com/forums/show...641#post760641
Thanks!!! I was starting to write too much on this thread titled pictures.
THANKS!... p.s. Keep the pictures coming of the 3rd generations!!!
Sams club 175.88 each.
LOOK AT THIS THREAD I STARTED REGARDING FURTHER PRICES OF TIRES.
https://www.yotatech.com/forums/show...641#post760641
Thanks!!! I was starting to write too much on this thread titled pictures.
THANKS!... p.s. Keep the pictures coming of the 3rd generations!!!
Last edited by ROOFGOOF; 12-02-2005 at 02:08 PM.
#87
Contributing Member
Join Date: Sep 2003
Location: FL
Posts: 1,437
Likes: 0
Received 0 Likes
on
0 Posts
thanks!
front: OME91 + OME881 + 10mm packers + 1/2" Revtek topout spacers + studs
rear : OME86 + OME891
1.5" RB body lift
= 4" lift all around.
Sonoran diff drop has my cv angles real nice.
I will be adding a steel rear bumper in a few months, and will throw in the OME cone spacers to counter the added weight.
front: OME91 + OME881 + 10mm packers + 1/2" Revtek topout spacers + studs
rear : OME86 + OME891
1.5" RB body lift
= 4" lift all around.
Sonoran diff drop has my cv angles real nice.
I will be adding a steel rear bumper in a few months, and will throw in the OME cone spacers to counter the added weight.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
FS[NorAtl]: Elocker 3rd with motor complete
mtb_taco
Axles - Suspensions - Tires - Wheels
4
08-20-2015 12:16 PM