Addicted Offroad Toyota winch bumper SALE!
11-16-2010 | 08:57 AM
#1
Thread Starter
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 3,477
Likes: 0
From: Ft Collins, CO
Addicted Offroad Toyota winch bumper SALE!
We have listed our entire line-up of winch bumpers on sale.
http://www.addictedoffroad.com
They fit all 84-95 pickup and 4runners. As well as 95-04 Tacomas and 96-02 4runners with a new heavy duty weld-in crossmember.
Our new winch plate is laser cut and press formed from 1/4" cold rolled steel. We have also added huge 1/2" winch mount supports. We have also added two 3/4" D-ring shackle mounts to the supports. (Shackles sold separately).
3rd gen 4runner/Tacoma bumpers on sale for $499
84-95 4runner and pickup bumpers On Sale for $375
And, our frame reinforcement kits are available as well. $45
http://www.addictedoffroad.com/bumpers.html
http://www.addictedoffroad.com
They fit all 84-95 pickup and 4runners. As well as 95-04 Tacomas and 96-02 4runners with a new heavy duty weld-in crossmember.
Our new winch plate is laser cut and press formed from 1/4" cold rolled steel. We have also added huge 1/2" winch mount supports. We have also added two 3/4" D-ring shackle mounts to the supports. (Shackles sold separately).
3rd gen 4runner/Tacoma bumpers on sale for $499
84-95 4runner and pickup bumpers On Sale for $375
And, our frame reinforcement kits are available as well. $45
http://www.addictedoffroad.com/bumpers.html
Last edited by ScottyC; 03-03-2011 at 03:36 PM.
12-15-2010 | 02:57 PM
#7
Registered User
Joined: Feb 2010
Posts: 174
Likes: 0
From: Maine
quick question. i have your winch bumper with square stinger and have a smitybilt xrc8 winch. is my grill going to get in the way or do i just need to take the bumper off and install the winch and then put the winch and bumper back on?
Trending Topics
12-15-2010 | 07:40 PM
#8
Thread Starter
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 3,477
Likes: 0
From: Ft Collins, CO
I have run the same winch twice. It will fit. Just take the upper bolts out, then loosen the lower and pull the bumper forward. Then slip the winch in place. Only issue is that you may need to add a tab to hold the solenoid box. Otherwise it fits like a glove!
