habanero's 1996 4Runner Build-Up Thread
#1782
Contributing Member
Thread Starter
#1783
Contributing Member
Thread Starter
96 4Runner 261,xxx miles
Cup holder arm spring repair
See broken post in foreground, the one replaced with the nail was broken even lower down and didn't work at all:
Underside of cupholder. Nails lined up in holes where the plastic posts would have gone:
Nails nipped and ground down lower than the screw heads
And the topside. I used a dab of jb weld on the underside of the nail heads. Prolly doesn't need it because of how the holder fits into the console:
Cup holder arm spring repair
See broken post in foreground, the one replaced with the nail was broken even lower down and didn't work at all:
Underside of cupholder. Nails lined up in holes where the plastic posts would have gone:
Nails nipped and ground down lower than the screw heads
And the topside. I used a dab of jb weld on the underside of the nail heads. Prolly doesn't need it because of how the holder fits into the console:
Last edited by habanero; 07-02-2017 at 06:38 PM.
#1784
Contributing Member
Thread Starter
96 4Runner
Location of bulbs in
Hazard switch (1)
Defrost switch (2)
Use a screwdriver to turn a quarter turn and take straight out.
Location of bulbs in
Hazard switch (1)
Defrost switch (2)
Use a screwdriver to turn a quarter turn and take straight out.
Last edited by habanero; 07-02-2017 at 06:39 PM.
#1785
Contributing Member
Join Date: Nov 2010
Location: Columbia River Gorge, Oregon...east side
Posts: 5,125
Likes: 0
Received 2 Likes
on
2 Posts
Since "it's gonna catch fire" or similar is the catch phrase, I'm surprised Fire Engine Red was not the suggestion.
Nice fix on the cup holder!
BTW, I've been trying to get the gears my old Trek MTB shifting well. Once the shifter pawl in the thumb shifter was cleaned and re-lubricated it was better. Adjusting the cables is a pain though. There're close to done now. :-)
Nice fix on the cup holder!
BTW, I've been trying to get the gears my old Trek MTB shifting well. Once the shifter pawl in the thumb shifter was cleaned and re-lubricated it was better. Adjusting the cables is a pain though. There're close to done now. :-)
Last edited by rworegon; 03-30-2014 at 05:21 PM.
#1786
Contributing Member
Thread Starter
96 4Runner
Hubby got impatient while I was doing the other stuff:
Grind grind grind:
First coat. Thinking satin black for the finish.
Those are our spare tires- better get this thing in pretty soon!
Hubby got impatient while I was doing the other stuff:
Grind grind grind:
First coat. Thinking satin black for the finish.
Those are our spare tires- better get this thing in pretty soon!
Last edited by habanero; 07-02-2017 at 06:40 PM.
#1787
Contributing Member
Thread Starter
96 4Runner 261,xxx miles
Replaced rear seat belts with junkyard finds. Easy to do, just a few pics:
One bolt, keys in at 3 places- at top and just above bolt
one bolt up here:
Fits through the trim:
And one bolt down here:
Had to unbolt the cargo cover holders(3 screws total), the door jamb trim (2 screws), the trim next to the seat (pops off), and the rear cargo panel (pop off enough to reach in). 14mm socket for all 3 bolts, phillips head screws.
Replaced rear seat belts with junkyard finds. Easy to do, just a few pics:
One bolt, keys in at 3 places- at top and just above bolt
one bolt up here:
Fits through the trim:
And one bolt down here:
Had to unbolt the cargo cover holders(3 screws total), the door jamb trim (2 screws), the trim next to the seat (pops off), and the rear cargo panel (pop off enough to reach in). 14mm socket for all 3 bolts, phillips head screws.
Last edited by habanero; 07-02-2017 at 06:42 PM.
#1788
Contributing Member
Thread Starter
HEY!
Well, it works better than trying to fix the lower tray on that last one, anyway!
Cleaned and lubed is excellent. Sometimes a brand new cable makes a difference too. Sometimes the rear derailleur shifter gets a little bent and that makes it hard or impossible to get the adjustment right. Good luck on it!
#1789
Contributing Member
Join Date: Nov 2010
Location: Columbia River Gorge, Oregon...east side
Posts: 5,125
Likes: 0
Received 2 Likes
on
2 Posts
Hi Hab! The axle is looking nice.
The bike adjustment is good enough, not perfect, but it hits all the gears easily without noise now. The brake pads are like bricks and will get replaced next.
I need to find a project or two on my truck. It does need some touch-up paint on the hood, the clear coat on the canopy is shot, and the carpet needs cleaning...that might be a good list after ski season ends in May.
Cherries are just beginning to bloom here. Now, allergy season is full on.
The bike adjustment is good enough, not perfect, but it hits all the gears easily without noise now. The brake pads are like bricks and will get replaced next.
I need to find a project or two on my truck. It does need some touch-up paint on the hood, the clear coat on the canopy is shot, and the carpet needs cleaning...that might be a good list after ski season ends in May.
Cherries are just beginning to bloom here. Now, allergy season is full on.
#1791
Contributing Member
Thread Starter
Ah, rw, allergies. Lucky me, all I get is stuffy ears so it's harder to hear and my voice changes. Actually, the voice change is usually for the better. I don't sound so much like Minnie Mouse off and on for a little bit. Mmmmm, cherries! It'll be interesting to hear what projects you come up with when you aren't sliding down hills on skinny little boards.
Glad to hear from you Jason, and the ego stoke doesn't feel too bad, either.
Glad to hear from you Jason, and the ego stoke doesn't feel too bad, either.
#1793
Contributing Member
Thread Starter
Few bouts of small hail, lots of lightning and rain but nothing awful for us. Some damage to the northeast and I didn't hear if IL got hit too bad. Thanks for the good thoughts!
#1794
Contributing Member
Thread Starter
96 4Runner 261,xxx miles
Good bye open dif
Hello locker dif
In enough to support the truck
Got started kinda late this afternoon, wasn't terribly hard other than the weight of the things. I already had the newer one on wheels so it could be rolled around so I rolled it up to the rear, put it on the jack and pulled the wheels so I could lower the thing and get it under the truck. This prolly would have been faster with 2 people but I wanted to do it myself and the Husbandio had his own stuff going on. I'll finish connecting the upper arms, panhard bar, parking brake cable, brake lines, extended dif breather, and other little stuff, bleed brakes, that sort of thing.
Next up some time in the not too distant future:
the front dif!
Good bye open dif
Hello locker dif
In enough to support the truck
Got started kinda late this afternoon, wasn't terribly hard other than the weight of the things. I already had the newer one on wheels so it could be rolled around so I rolled it up to the rear, put it on the jack and pulled the wheels so I could lower the thing and get it under the truck. This prolly would have been faster with 2 people but I wanted to do it myself and the Husbandio had his own stuff going on. I'll finish connecting the upper arms, panhard bar, parking brake cable, brake lines, extended dif breather, and other little stuff, bleed brakes, that sort of thing.
Next up some time in the not too distant future:
the front dif!
Last edited by habanero; 07-02-2017 at 06:43 PM.
#1797
Contributing Member
Thread Starter
#1799
Contributing Member
Join Date: Nov 2010
Location: Columbia River Gorge, Oregon...east side
Posts: 5,125
Likes: 0
Received 2 Likes
on
2 Posts
Now, to get the front on the schedule?
How is that new diff activated?
A crashed Taurus does not sound so good. Hope it was only the car that was hurt.
Last edited by rworegon; 04-06-2014 at 05:26 PM.
#1800
Registered User
My younger daughter. Wednesday morning she got caught on the tail end of a sudden freeway slowdown, and bumped her Taurus wagon into the back end of a BMW X5. She's OK, got a bump on the top of her head somehow, some bruises and sore spots, all minor.
The tall bumper of the SUV combined with the dipped nose of the Taurus meant that her car nosed under and the sheetmetal took the hit. I.e. it looked pretty nasty, but not that hard of a hit. Nothing that didn't unbolt easily was bent. Just a lot of bent parts to unbolt, get at a junkyard, and bolt back on.
Brief pictoral:
What the tow truck dropped off:
Everything broken/bent taken off:
Parts slapped back on:
A lick of paint applied, fluids added, good to go again:
The tall bumper of the SUV combined with the dipped nose of the Taurus meant that her car nosed under and the sheetmetal took the hit. I.e. it looked pretty nasty, but not that hard of a hit. Nothing that didn't unbolt easily was bent. Just a lot of bent parts to unbolt, get at a junkyard, and bolt back on.
Brief pictoral:
What the tow truck dropped off:
Everything broken/bent taken off:
Parts slapped back on:
A lick of paint applied, fluids added, good to go again: