habanero's 1996 4Runner Build-Up Thread
#1121
Contributing Member
Join Date: Nov 2010
Location: Columbia River Gorge, Oregon...east side
Posts: 5,125
Likes: 0
Received 2 Likes
on
2 Posts
You might give the end of the stud a gently tap with a hammer to help break the rust free.
Definately easier to replace donuts now, but I did mine with exhaust in place and it was not too bad after cutting the old donuts off.
Definately easier to replace donuts now, but I did mine with exhaust in place and it was not too bad after cutting the old donuts off.
Last edited by rworegon; 02-15-2013 at 05:39 PM.
#1122
Contributing Member
Thread Starter
It's over! The hubby joined me in working on the exhaust again today. Our biggest problem once we decided to cut the studs was our right angle drill is more than half dead and we needed a drill bit. Up to Lowes for the drill bit, Lowes, Home Depot, Sears and finally, Harbor Freight for the right angle drill. Put it together, the drill bit tip broke and the right angle drill made it a whopping 30 seconds. What a fiasco. We finally got the studs cleared out and the exhaust went on just. like. that.
Stupid studs.
Mr. Hubby and I worked well together today, I had fun in the cold with him. It doesn't hurt how he looks in jeans, either....
SO.
It's done it's done it's done it's done it's done it's done it's done it's done!
And hopefully the 99 won't need exhaust for another few years AND we won't even bother messing with the studs unless they come right out.
^ things we learned today.
Now comes the wait for whether or not the new cat will throw a code or not. Supposedly Cali exhaust can be annoying that way, but the 96 doesn't seem to be picky. Maybe we'll get lucky!
Stupid studs.
Mr. Hubby and I worked well together today, I had fun in the cold with him. It doesn't hurt how he looks in jeans, either....
SO.
It's done it's done it's done it's done it's done it's done it's done it's done!
And hopefully the 99 won't need exhaust for another few years AND we won't even bother messing with the studs unless they come right out.
^ things we learned today.
Now comes the wait for whether or not the new cat will throw a code or not. Supposedly Cali exhaust can be annoying that way, but the 96 doesn't seem to be picky. Maybe we'll get lucky!
#1123
Contributing Member
Join Date: Nov 2010
Location: Columbia River Gorge, Oregon...east side
Posts: 5,125
Likes: 0
Received 2 Likes
on
2 Posts
Hab, glad you guys got it done. Seems someone is very, very happy it's done! lol
Those two steps forward, one step back projects can get frustrating in a hurry.
Those two steps forward, one step back projects can get frustrating in a hurry.
Last edited by rworegon; 02-16-2013 at 04:19 PM.
#1124
Contributing Member
Thread Starter
Yep! We'd have saved a lot of time if we'd just gone ahead and dealt with the studs right away when they'd proved their stubbornness and if we'd had a working right angle drill and sharp bits or at least if the ones we spent over an hour and a half running for worked!
#1125
Contributing Member
Join Date: Mar 2003
Location: COTKU,Ontario,Canada
Posts: 11,334
Likes: 0
Received 0 Likes
on
0 Posts
Guess IK what to get you for your birthday hab...
what's so scary about cut-off wheels? just wear gloves and keep your shirt buttoned all the way up... and safety glasses of course..
wait I seem to recall you had an accident with one of those kooky things awhile back... am I right? your success this time should slay any leftover demons from that bad experience...
what's so scary about cut-off wheels? just wear gloves and keep your shirt buttoned all the way up... and safety glasses of course..
wait I seem to recall you had an accident with one of those kooky things awhile back... am I right? your success this time should slay any leftover demons from that bad experience...
#1127
Contributing Member
Thread Starter
Guess IK what to get you for your birthday hab...
what's so scary about cut-off wheels? just wear gloves and keep your shirt buttoned all the way up... and safety glasses of course..
wait I seem to recall you had an accident with one of those kooky things awhile back... am I right? your success this time should slay any leftover demons from that bad experience...
what's so scary about cut-off wheels? just wear gloves and keep your shirt buttoned all the way up... and safety glasses of course..
wait I seem to recall you had an accident with one of those kooky things awhile back... am I right? your success this time should slay any leftover demons from that bad experience...
Chef, if you saw him you'd totally understand. Well, maybe you wouldn't but I do enough understanding for the both of us.
#1128
Contributing Member
Thread Starter
96 4Runner 247,400
Oil change
Check front diff fluid
Bolted skids back on
Rotated tires
I decided to go to the bigger oil filter, the one for the V8, #90915-YZZD3
The extra filter material is nice enough and I'm hoping it'll be easier to get a wrench on it.
Oil change
Check front diff fluid
Bolted skids back on
Rotated tires
I decided to go to the bigger oil filter, the one for the V8, #90915-YZZD3
The extra filter material is nice enough and I'm hoping it'll be easier to get a wrench on it.
Last edited by habanero; 02-19-2013 at 04:58 AM.
#1130
Contributing Member
Thread Starter
October??? It was back when I did the lower control arm bushings, I think. You are correct, it feels GREAT! A whole lot less nekkid.
Did you get your lca bushing situation resolved?
Did you get your lca bushing situation resolved?
#1131
Registered User
Not yet. Talked with customer service at energy suspension yesterday and he said he'd never seen that problem. Said he'd have an engineer look at it and get back to me right away. That was ... 23 hours ago. I guess we have different definitions of right away. My dealership has them in stock and the price is not too bad. Today is slammed but I hope I can get them tomorrow. Then I just need to find a press. :grumbe:
Good work on yours though. I never want to work on exhaust anything. I've only ever heard people talk about how everything is cemented in place.
Good work on yours though. I never want to work on exhaust anything. I've only ever heard people talk about how everything is cemented in place.
#1132
Registered User
dang hab I dont have time to check in for a few days and you do all kinds of cool stuff. theres all kinds of things that can be done with a front receiver, I had one on an old cherokee I had and used it all the time. Im with you on being a little timid with the cut off wheel, never had anything bad happen but boy it can quick. I hate exaust work to glad to hear it came together for ya.
#1133
Contributing Member
Thread Starter
JBurt....there was a thread on lower control arm bushings recently...I'm very tempted to try it next go round, which better not be before 550,000 miles.
https://www.yotatech.com/forums/f2/f...rd-gen-265072/
Thanks Jason. I think I hate exhaust work too, now, and I am still not liking the whole cut off wheel business even if it did make it a lot easier.
https://www.yotatech.com/forums/f2/f...rd-gen-265072/
Thanks Jason. I think I hate exhaust work too, now, and I am still not liking the whole cut off wheel business even if it did make it a lot easier.
#1134
Contributing Member
Join Date: Mar 2003
Location: COTKU,Ontario,Canada
Posts: 11,334
Likes: 0
Received 0 Likes
on
0 Posts
Maybe it's the steampunk in me but I love cut-off wheels... stuff in the ear plugs through on the goggles and gauntlets and let the sparks fly... then again I also love quik-cuts [big gas powered concrete saws] for these I wear masks... the ultra fine dust is very "lung friendly" and will plug you solid with abrasive powder real fast.
Creative mayhem... it's kind of my thing lol.
Creative mayhem... it's kind of my thing lol.
#1135
Contributing Member
Thread Starter
Chainsaws I'm ok with. Sawzall, not a problem. Even the cute little cut-off for the Dremel makes me cringe.
Looks like you enjoyed your fine trip Down Under.
Looks like you enjoyed your fine trip Down Under.
#1137
Contributing Member
Thread Starter
The pinky was an exacto knife. I just don't like things that randomly fly apart. I also have an unnatural fear of balloons.
Yes, seriously. :/
Yes, seriously. :/
#1138
Registered User
iTrader: (5)
Holy mackerel! I'm not sure if you've ever seen those photos of that guy that's permanently wearing the 5 inch cutting disc as a forehead hat?!?!.... But ever since seeing those pictures I've always used extreme caution when using an angle grinder or skill saw. So anyway, how you be girl?
#1139
Contributing Member
Thread Starter
Chef! Cut off carnage? I'm really really hoping I never do, either!
I be excellent. Might get a day off work and the kid a day off school tomorrow, waiting to see if we get a snow day. The exhaust sounds nice, quiet, but a tad deeper than stock. The moo box *isn't* but it needs to warm up to know if it is 'fixed' or not. Truck's putting along pleasingly, I'm going to have to invent another reason to mess with it.
Your truck is going along fine too, I've seen. Hope you're feeling good good great!
I be excellent. Might get a day off work and the kid a day off school tomorrow, waiting to see if we get a snow day. The exhaust sounds nice, quiet, but a tad deeper than stock. The moo box *isn't* but it needs to warm up to know if it is 'fixed' or not. Truck's putting along pleasingly, I'm going to have to invent another reason to mess with it.
Your truck is going along fine too, I've seen. Hope you're feeling good good great!
#1140
Registered User
Wow!! How did I miss the link you posted about the control arms. Thats awesome! I just got back from picking my toyota bushings up. Thanks.
I've never been a fan of anything with razors. Cut myself too many times and too easily.
Never heard of a cutoff wheel flying apart but I can imagine how that would be really scary, especially if you're under a car.
I've never been a fan of anything with razors. Cut myself too many times and too easily.
Never heard of a cutoff wheel flying apart but I can imagine how that would be really scary, especially if you're under a car.