I spent all of Sunday working on my vehicles. There are still a lot of things I want to do and a lot of parts on the shelf in boxes just waiting to be installed. So post up! What's on the pending list for your rig?

Here's a list of parts I have but haven't installed yet:
Brembo slotted/drilled rotors
EBC "green" brake pads
1" rear spacers
Autometer Z-series air fuel ratio and boost gauge
LoTek 2 pod piller

 

I just did my "TRD Sport" decals and next up will be a set of 265/75 Revos come spring or I'll do Bils and PP springs then the tires.

 

2 inch lift so I can get the nasty sag from the butt gone.

then 32 or 33s.

Not sure after that...taking it really slow.

I wouldn't consider the Safari rack I'm getting a mod.

 

The "Dome Light Mod"

 

Hopefully coming soon...

1.) LCE Headers
2.) Finish up my intake
3.) High Flow Cat
4.) Front and Rear Sway Bar

 

Just got the Magnaflo muffler from jimabena74 so tonight if everything goes well.......

 

what mods do I NOT want to do???

saws to replace my ome front susp.
build a rear cargo box much like skyrat's
35's
eventually get another 3rd gen, or taco, and sas mine

 

my list has grown exponentially since I wheeled in AZ

 

pending mods:
TJM-15
bigger revos
deckplate mod

 

Pending Mods

Rear Bumper Slider and Hitch like the one here: http://www.allprooffroad.com/bumpers.htm

Next is Sliders

Custom Skid Plates

Suspension Lift. Ball Joint Spacers and Coil Spacers (Or Cruiser Coils)

Thats all thats on my list so far.

 

YotaTruck-
That's a sharp truck! Thinking about a turbo? That'd be sick.

 

Thanks for the comment, it's come a long way. Yeah I've looked into turbo'n it but I think it would be too costly. A 7MGTE swap would be nice .

 

3" susp. lift in about 1 month
Rear Air Locker this fall
ARB Front Bumper and Warn 9000 next year

 

1)sdori ball joint spacers
Still in the box on my garage floor
2) rb 1" body lift
3) 33x10.5 or 12.5 (not decided yet)
4) 15x8 wheels
5) custom rear bumper with tire carrier (local guy @ rocktech)
*** now I'm dreaming***
6) 4:56 frt and rear with lockers


oh yeah these all require time and $$ so its gonna be a while

 

Pending, as in parts sitting in the garage:

differential drop spacers (bolts are soaking in liquid wrench right now)
rear differential breather
safari rack with 3 sets of lights and hi-lift mount
air compressor with tanks


Pending, as in parts I want to get:
new skid plates
front bumper
arb locker
gears
33s or 35s
Alcan or Deaver leaf pack with Bilsteins
new Donahoe's with rust resistent material

 

get a 4WD

 

4.3l Chevy V6 swap

 

Donahoe Coilovers
Camburg Upper Arm
Deaver Leafs
Donahoe Rear Shocks
17" Sequoia Rims
275/70/17 MTR's
Deckplate Mod
Magnaflow Muffler

 

SAWS? why you should take a look in the classifieds (I'm too lame to post a link to my ad).

Pending tolerable weather or a work space(it was 2 degrees last night):

New Wheelers(Deaver) 5 leaf springs are sitting in the unheated (and cramped) garage. Some 5100's will go on with them.

I gonna try bamachem's front lift, I have the coils and the spacers but I await the longer studs. (I reckon this will lead to a diff-drop)

Probably gonna do a 1"RB lift after that, wouldn't mind going 2", but I fear the hassles.

 

Pending on 4Runner:
Outside temp gauge

Coming soon:
1" RB body lift

Pending on Celica
Downpipe
TMIC w/greddy type S BOV