Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Toyota 4Runner Engine Guides
- Toyota 4Runner 1996-2002: How to Replace Valve Cover Gaskets
Step by step instructions for do-it-yourself repairs.
Browse all: Toyota 4Runner Engine Guides
Valve cover gasket replacement
#81
Registered User
The head has a semicircular cutout in the center of the two short sides. The "halfmoon" is a semicircular piece of rubber that fits into the head, to seal up that cutout in the head, as part of the valve cover gasket. One in each short side of the head.
You can see the front one just the way the truck sits. It's right out in the open.
Good fortune!
Pat☺
You can see the front one just the way the truck sits. It's right out in the open.
Good fortune!
Pat☺
#82
The head has a semicircular cutout in the center of the two short sides. The "halfmoon" is a semicircular piece of rubber that fits into the head, to seal up that cutout in the head, as part of the valve cover gasket. One in each short side of the head.
You can see the front one just the way the truck sits. It's right out in the open.
Good fortune!
Pat☺
You can see the front one just the way the truck sits. It's right out in the open.
Good fortune!
Pat☺
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM