95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Used oil storage containers: I need one that works!

Thread Tools
 
Search this Thread
 
Old 08-20-2004 | 12:42 PM
  #1  
rimpainter.com's Avatar
Thread Starter
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Exclamation Used oil storage containers: I need one that works!

Anybody else tired of cheap-o used oil containers that leak and drip after you put oil in them? I have one right now that really sucks. This is it:



This thing leaks and drips - in my vehicles when I go to the oil recycling place. I hate it!

I searched around forever, but this is the best I could find from a design standpoint (visually). Besides those things that suck up oil from the dip stick hole, do you guys know of a good container that actually works, under $20?

Thanks!
Old 08-20-2004 | 12:45 PM
  #2  
bamachem's Avatar
Banned
 
Joined: Jun 2003
Posts: 0
Likes: 1
Take what you have and put it in a Hefty Lawn and Leaf bag (thick black ones) before you put it in the runner and you won't have to worry about finding a new one or getting stains from the leaks.
Old 08-20-2004 | 12:47 PM
  #3  
Tacoma Dude's Avatar
Contributing Member
 
Joined: Mar 2003
Posts: 8,345
Likes: 0
From: Orange County, CA
I feel your pain - that's the same exact one I have.
It leaked while I had it in Dino now the interior smells like gear oil...
Old 08-20-2004 | 12:48 PM
  #4  
shazaam's Avatar
Contributing Member
 
Joined: Mar 2003
Posts: 5,020
Likes: 0
pour it into your neighbors yard .. thats what I always do .........
Old 08-20-2004 | 12:49 PM
  #5  
shazaam's Avatar
Contributing Member
 
Joined: Mar 2003
Posts: 5,020
Likes: 0
just kidding
Old 08-20-2004 | 12:49 PM
  #6  
rimpainter.com's Avatar
Thread Starter
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Originally Posted by bamachem
Take what you have and put it in a Hefty Lawn and Leaf bag (thick black ones) before you put it in the runner and you won't have to worry about finding a new one or getting stains from the leaks.
I do that Andy, but then it gets all over my hands and the floor of the parts store...then I grab my beautful leather wrapped steering wheel with my filthy hands. I want a friggin container that seals!
Old 08-20-2004 | 12:51 PM
  #7  
rimpainter.com's Avatar
Thread Starter
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Originally Posted by sdastg1
pour it into your neighbors yard .. thats what I always do .........
Actually, I was just going to start pouring it into the fresh water canal behind our house. The water tastes nasty here anyway.
Old 08-20-2004 | 01:02 PM
  #8  
Bob_98SR5's Avatar
Registered User
 
Joined: May 2002
Posts: 10,036
Likes: 5
From: Los Angeles
hey christian,

I have the same crappy thing as you do but i dont transport it in there anymore. i used to put it in a box that is lined w/ a garbage bag. sdastg1 was really complimentary of how tidy my hands were when i was pouring my used oil on his front lawn.

tip: go ask the guys at the oil change places if they have those big 5 or 6 gallon bottles that theyre throwing away. i have two now i just use a funnel to pour it in those. much better.

bob
Old 08-20-2004 | 01:04 PM
  #9  
rimpainter.com's Avatar
Thread Starter
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Hmmm, good idea Bob. My local camping store has some pretty nifty fresh water/misc containers (not intended for oil of course) that just might do the trick too.
Old 08-20-2004 | 01:11 PM
  #10  
4-RUNNIN' FREAK's Avatar
Contributing Member
 
Joined: Jun 2004
Posts: 3,950
Likes: 0
From: NNJ
I drain it into this old "pan" and dump it into either used bleach bottles (big ones) or into 5 gallon buckets if I have some lying around.
Then I just take it all to the city recycling yard and drop it off and thats that for that. No having to drain anything and wait for it back.
Old 08-20-2004 | 01:14 PM
  #11  
hillbilly's Avatar
Contributing Member
 
Joined: Mar 2003
Posts: 759
Likes: 0
From: Lat: 40° 47' 01" Long:-78° 00' 58"
I reuse the 2½ gallon Amsoil ATF container left over from my ATF service to transport my used oil. I put the 2½ gal in an old milk crate so I won't fall over when cornering...

Last edited by hillbilly; 08-23-2004 at 11:33 AM.
Old 08-20-2004 | 01:14 PM
  #12  
Flamedx4's Avatar
Registered User
 
Joined: May 2004
Posts: 3,291
Likes: 0
From: 100 miles offshore as much as possible, & Springfield Oregon USA
I use a basic pan. I save a milk jug or two and pour the oil in them (also the 5 qt jug the new oil came in.) I can carry them, open them, pour the oil in the recycler, toss the jug in the bin, and my hands stay clean.
Old 08-20-2004 | 01:17 PM
  #13  
4-RUNNIN' FREAK's Avatar
Contributing Member
 
Joined: Jun 2004
Posts: 3,950
Likes: 0
From: NNJ
Do you guys pay to recycle it? Just wondering.
The auto stores here make you pay, but you can do it for free through the city. Another reason for high taxes.
One auto store is a ¼ mile away from this place too.
Dump all kinds of batteries and stuff.
Just not Gasoline, asbestos and the likes. (that is what it reads on the gate.)

Last edited by 4-RUNNIN' FREAK; 08-20-2004 at 01:18 PM.
Old 08-20-2004 | 01:17 PM
  #14  
rimpainter.com's Avatar
Thread Starter
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Originally Posted by Flamedx4
I use a basic pan. I save a milk jug or two and pour the oil in them (also the 5 qt jug the new oil came in.) I can carry them, open them, pour the oil in the recycler, toss the jug in the bin, and my hands stay clean.
You guys can't tell me that you have never had an Exxon Valdez mishap in your garage using this method. I know I have. In fact, that is why I went to the above pictured "superior" oil container to begin with. The stinkin oil would never pour right during transfer to milk containers, etc.
Old 08-20-2004 | 01:19 PM
  #15  
rimpainter.com's Avatar
Thread Starter
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Originally Posted by 4-RUNNIN' FREAK
Do you guys pay to recycle it? Just wondering.
The auto stores here make you pay, but you can do it for free through the city. Another reason for high taxes.
One auto store is a ¼ mile away from this place too.
Nope, not here. But they are usually pricks and won't help you. In fact, I had one guy at Checker tell me that it is a big pain for me to bring oil in on a Friday. Well, post a sign then you jerk.
Old 08-20-2004 | 01:21 PM
  #16  
4-RUNNIN' FREAK's Avatar
Contributing Member
 
Joined: Jun 2004
Posts: 3,950
Likes: 0
From: NNJ
I do all fluid transfers over a litter box with speedy dry in it.
Just like cat litter but more absorbent.
The people that like to dump the oil down the storm drains messed it up for people that like to do their own on the street here.
Old 08-20-2004 | 01:23 PM
  #17  
4-RUNNIN' FREAK's Avatar
Contributing Member
 
Joined: Jun 2004
Posts: 3,950
Likes: 0
From: NNJ
Buy those microbes that they used to "eat" the oil from tanker spills. Can be the next new trendy pet. Think they'll like synthetics? I wonder what they poop out.

Last edited by 4-RUNNIN' FREAK; 08-20-2004 at 01:25 PM.
Old 08-20-2004 | 01:26 PM
  #18  
cubuff4runner's Avatar
Registered User
 
Joined: Oct 2003
Posts: 1,133
Likes: 0
From: Thornton, Colorado
Originally Posted by <96 Runner>
You guys can't tell me that you have never had an Exxon Valdez mishap in your garage using this method. I know I have. In fact, that is why I went to the above pictured "superior" oil container to begin with. The stinkin oil would never pour right during transfer to milk containers, etc.
A $1 funnel solves this problem
Old 08-20-2004 | 01:29 PM
  #19  
rimpainter.com's Avatar
Thread Starter
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Originally Posted by cubuff4runner
A $1 funnel solves this problem
Nope, it still splashes and fills too quickly, then overflows all over my precious epoxied floor. Besides, nothing I own will pour properly. That is the whole point of my thread, even when used as intended the stupid thing leaks.

I have towels, latex gloves, oil-absorb kitty litter stuff, etc. my whole intention is to have no need for those countermeasures any longer.
Old 08-20-2004 | 01:34 PM
  #20  
cubuff4runner's Avatar
Registered User
 
Joined: Oct 2003
Posts: 1,133
Likes: 0
From: Thornton, Colorado
Originally Posted by <96 Runner>
Nope, it still splashes and fills too quickly, then overflows all over my precious epoxied floor. Besides, nothing I own will pour properly. That is the whole point of my thread, even when used as intended the stupid thing leaks.

I have towels, latex gloves, oil-absorb kitty litter stuff, etc. my whole intention is to have no need for those countermeasures any longer.
I know, had to give you a hard time
If you looked at the floor of my storage unit where I transfer all my oil you can tell I always have problems. :pat:



All times are GMT -8. The time now is 04:39 AM.