95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Underdrive Pulley-need your opinion!

Thread Tools
 
Search this Thread
 
Old 07-23-2003 | 06:36 PM
  #61  
its2slo's Avatar
Contributing Member
 
Joined: Apr 2003
Posts: 705
Likes: 0
From: portland oregon
my .02

we got 8hp with the swa pulley on my nissan.
it has to be one of the best mods for the money/hp.
a pulley for my 3.4? this is good news, it will hopefully help what my trd exhaust hurt (since i have a basically stock engine)
a complete set would be even better!
not all pulleys are =, the unorthdox pulleys's didnt give as much power on the nissan as the swa..hope they did their homework, lets see the numbers.


Old 07-23-2003 | 08:15 PM
  #62  
Gadget's Avatar
Registered User
 
Joined: May 2002
Posts: 1,539
Likes: 0
From: Southern MD USA
OK, lets review...

Gadget

www.GadgetOnline.com
Old 07-23-2003 | 10:29 PM
  #63  
asudan96Runner's Avatar
Contributing Member
 
Joined: Jul 2002
Posts: 324
Likes: 0
From: Tempe, AZ
So where are they? I want one too!

Dan
Old 07-24-2003 | 06:28 AM
  #64  
MTL_4runner's Avatar
Contributing Member
 
Joined: Jul 2003
Posts: 8,807
Likes: 3
From: Montreal, QC Canada
Originally posted by its2slo
my .02

we got 8hp with the swa pulley on my nissan.
it has to be one of the best mods for the money/hp.
a pulley for my 3.4? this is good news, it will hopefully help what my trd exhaust hurt (since i have a basically stock engine)
a complete set would be even better!
not all pulleys are =, the unorthdox pulleys's didnt give as much power on the nissan as the swa..hope they did their homework, lets see the numbers.


For Unorthodox it will be a tradeoff between underdriving the ascessories too much and the power you gain from it. To me, I would rather get a little less power than have dim headlights or AC that doesn't cool very well at idle.
Old 07-24-2003 | 07:17 AM
  #65  
rimpainter.com's Avatar
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Originally posted by its2slo
my .02

we got 8hp with the swa pulley on my nissan
I believe it. Most Nissans have an internal balance shaft assembly, which is good for another 8HP when removed. But, that should only be done on balanced and blueprinted motors.
Old 07-24-2003 | 07:24 AM
  #66  
its2slo's Avatar
Contributing Member
 
Joined: Apr 2003
Posts: 705
Likes: 0
From: portland oregon
i sold the nissan, dont go there. that said, i had no probs. with it whatsoever. here are some others....there are 100's of threads over there beating this to death again and again, over and over. btw the first guy responding in the first link is an ase mechanic, on top of that hes damn good....when gadget gets his we will have specific data for the 3.4, but based on my experience so far i wouldnt think twice about the lighter pulley

http://www.nissantalk.com/forum/show...ROBLEMS+PULLEY


http://www.nissantalk.com/forum/show...ROBLEMS+PULLEY
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fountain
Tires & Wheels
3
02-28-2016 11:13 AM
Firefightersink15
86-95 Trucks & 4Runners
17
11-23-2015 11:32 PM
Iceman4193
86-95 Trucks & 4Runners
22
10-16-2015 11:50 AM
4Xtruck
95.5-2004 Tacomas & 96-2002 4Runners
16
09-24-2015 10:38 AM
superdogg2014
Domestic Swaps
1
09-19-2015 10:13 AM




All times are GMT -8. The time now is 05:50 AM.