Turn signals into DRL
#22
Registered User
Thread Starter
Join Date: Aug 2004
Location: N. Hollywood, CA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Well, here's a couple pics..not the best one but you get the idea.
First one shows both turn indicators acting as daytime running lights. They also work as normal when making turns.
Second pic shows where i mounted module under the hood. Hard to tell but it's just to the right of the fusebox in the picture (shiny black small cylinder). It's about the size of a large 35mm film canister, cylindrical, with about 7 wires to connect or splice.
First one shows both turn indicators acting as daytime running lights. They also work as normal when making turns.
Second pic shows where i mounted module under the hood. Hard to tell but it's just to the right of the fusebox in the picture (shiny black small cylinder). It's about the size of a large 35mm film canister, cylindrical, with about 7 wires to connect or splice.
#25
Registered User
Join Date: Apr 2006
Location: Seattle, WA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Here's a easier way of wiring the front bumper park lights with 5 pin bosch relay, the only con would be, the bumper lights will flash alternatly of the T/S in the fenders. Each side will need it's own relay. This idea is from Duffdog.
You can do it with a simple 5 pin relay-- 30 to bulb, 87 to Park light +12v, 86 to gnd of blinker lights (since toyotas are switched ground) and 85 to +12 from running lights. 87a connects to nothing since you want the light to turn off when the blinker blinks it.
You can do it with a simple 5 pin relay-- 30 to bulb, 87 to Park light +12v, 86 to gnd of blinker lights (since toyotas are switched ground) and 85 to +12 from running lights. 87a connects to nothing since you want the light to turn off when the blinker blinks it.
#26
Morning all,
Just wondering if anybody else has done this modification with the WebElectric DRL module that Jon used?.... any comments, good or bad?
I'm looking at using the same DRL module on a 2004 Tacoma, but I've been advised that burning the turn-signals continuously, which they were never intended to do, might not be a great plan.
Thanks in advance.
Ewan
Just wondering if anybody else has done this modification with the WebElectric DRL module that Jon used?.... any comments, good or bad?
I'm looking at using the same DRL module on a 2004 Tacoma, but I've been advised that burning the turn-signals continuously, which they were never intended to do, might not be a great plan.
Thanks in advance.
Ewan
Thread
Thread Starter
Forum
Replies
Last Post
Dennisx2
General Electrical & Lighting Related Topics
0
08-04-2015 01:26 PM
PopsDad1
General Electrical & Lighting Related Topics
0
07-30-2015 02:21 PM