Trd Shocks For a 3rd Gen 4runner
#81
Registered User
Join Date: Aug 2003
Location: San Diego, CA
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Jackstands: $20
springcompressors: $40 deposit at Autozone
a YT-dude with some tools and advice priceless!
The fronts is a pain to do and that is why the dealer quotes you so high (I think my dealer said 3h labor+alignment). Looks a J.A. writeup under handling (http://www.top4runners.com/ja/index.html) also Steve Schaefer should have a write up or tricks (http://fastq.com/~sschaefer/4runner.html).
The rears are reasonable easy. You need a 14mm wrench for the top bolt and an adjustable wrench to hold the top of the shock. I think the bottom bolt is 17mm.
springcompressors: $40 deposit at Autozone
a YT-dude with some tools and advice priceless!
The fronts is a pain to do and that is why the dealer quotes you so high (I think my dealer said 3h labor+alignment). Looks a J.A. writeup under handling (http://www.top4runners.com/ja/index.html) also Steve Schaefer should have a write up or tricks (http://fastq.com/~sschaefer/4runner.html).
The rears are reasonable easy. You need a 14mm wrench for the top bolt and an adjustable wrench to hold the top of the shock. I think the bottom bolt is 17mm.
#83
Contributing Member
Join Date: Aug 2002
Location: Home: Aurora, CO; Work: The People's Republic of Denver
Posts: 1,991
Likes: 0
Received 0 Likes
on
0 Posts
Spoke with the dealer, and he didn't do the shocks at my request. Will be meeting up with the VA CORE Group on Sunday, maybe someone there can help me over a weekend. As for working on my truck where I live, that's prohibited by the complex's by-laws, another reason we're buying a house!
#85
Looks like they are still advertising these:
http://www.eshocks.com/bil_veh.asp?M...&Manf=Bilstein
Local Midas said my stock shocks were starting to leak in the rear. Just wanted to get some feedback from those of you that have installed these Bils. I'd prefer something that rides pretty close to stock, not much stiffer. Most of my driving is city and highway with an occasionl trek in the snow or a dirt road - no off-roading really.
So how will these feel compared to stock on my 3rd gen 4runner?
http://www.eshocks.com/bil_veh.asp?M...&Manf=Bilstein
Local Midas said my stock shocks were starting to leak in the rear. Just wanted to get some feedback from those of you that have installed these Bils. I'd prefer something that rides pretty close to stock, not much stiffer. Most of my driving is city and highway with an occasionl trek in the snow or a dirt road - no off-roading really.
So how will these feel compared to stock on my 3rd gen 4runner?
#87
Registered User
Join Date: Apr 2005
Location: Overland Park, KS
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Amorphous, you seem to knwo these pretty well inside an out. 2 questions:
Do you need to have taller springs to run this shock set up or can I replace shock only?
You said the back end was a bear, is there a place on the top of the shock to hold it still with an allan wrench?
Do you need to have taller springs to run this shock set up or can I replace shock only?
You said the back end was a bear, is there a place on the top of the shock to hold it still with an allan wrench?
#88
Registered User
Join Date: Aug 2003
Location: San Diego, CA
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
dwichman - they are firmer. Smaller potholes at slow speeds are felt more. Highway is smooth. Overall you have a more controlled but firmer ride. I like them but if you like how it is now then stick with stock.
You can keep your stock springs
You can keep your stock springs
Last edited by Roadtripr; 10-03-2005 at 12:56 PM.
#89
Registered User
exactly - you CAN keep your stock springs.
IIRC, the top mount on the OEM is a wrench point - not an allen head. The Bilsteins have an allen head. I'd advise you to climb under there a few weeks in advance and spray LOADS of PB blaster on those top rear shock mounts. Hit it a few times before you start turning wrenches. That top mount is like a cup, it holds EVERYTHING from as long as the truck has been on the road....and my 4r spent some time in MN - so...it saw a wee bit of road salt!
aaron
IIRC, the top mount on the OEM is a wrench point - not an allen head. The Bilsteins have an allen head. I'd advise you to climb under there a few weeks in advance and spray LOADS of PB blaster on those top rear shock mounts. Hit it a few times before you start turning wrenches. That top mount is like a cup, it holds EVERYTHING from as long as the truck has been on the road....and my 4r spent some time in MN - so...it saw a wee bit of road salt!
aaron
#90
Registered User
Join Date: Nov 2005
Location: defiance, ohio
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
yeah i know this is an old tread but i am trying to find these shocks @ the prices you guys are talking about and it looks to me that they are 280 for the 96-02 4runner.? am i looking at this wrong?
http://www.cabeperformance.com/detai...mance%20shocks
http://www.cabeperformance.com/detai...mance%20shocks
#91
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM