95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners
Old 03-30-2016, 10:24 AM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:Browse all: Toyota Tacoma Specifications & General Maintenance
Print Wikipost

Toyota Truck, 4Runner, Tundra Balljoint Failures

Thread Tools
 
Search this Thread
 
Old 02-08-2018 | 05:52 AM
  #81  
stewartesq's Avatar
Registered User
 
Joined: Feb 2018
Posts: 7
Likes: 0
From: Belleair, FL
Wow....thank you for this info. I have a 1999 Toyota 4 Runner and would hate for this to happen.
Old 02-08-2018 | 11:57 AM
  #82  
RAD4Runner's Avatar
Registered User
 
Joined: Mar 2012
Posts: 7,094
Likes: 671
Originally Posted by stewartesq
Wow....thank you for this info. I have a 1999 Toyota 4 Runner and would hate for this to happen.
YUP, Obviously Toyota did a poor job informing owners about this potentially deadly problem.
Old 02-08-2018 | 12:03 PM
  #83  
stewartesq's Avatar
Registered User
 
Joined: Feb 2018
Posts: 7
Likes: 0
From: Belleair, FL
Well, I'm an attorney in Florida and wonder if a claim could exist under Florida's Deceptive and Unfair Trade Practices Act. From what I recall in reading this thread a few days ago, the dealerships are not helpful in fixing this problem; nor has any recall notice been issued. Let me know if I'm incorrect about that. I've been reading a lot of threads on here.
Old 02-20-2018 | 05:02 PM
  #84  
sharrack's Avatar
Registered User
 
Joined: Jan 2007
Posts: 732
Likes: 6
The greatest lesson i've learned from this forum is when there are inherent toyota problems.....you just change them out.....end of subject.
Strawberry milkshake rad....changed
Ball joint issue.....changed
just do it!!
Old 02-20-2018 | 09:59 PM
  #85  
stewartesq's Avatar
Registered User
 
Joined: Feb 2018
Posts: 7
Likes: 0
From: Belleair, FL
Cost

Ok, understood. Advice is to swap out ball joints. For a 3rd generation 1999 Toyota 4 Runner Limited Edition, what's the approximate global cost?
Old 12-05-2018 | 11:13 PM
  #86  
RAD4Runner's Avatar
Registered User
 
Joined: Mar 2012
Posts: 7,094
Likes: 671
Found this on NHTSA site:
https://static.nhtsa.gov/odi/rcl/200...5V225-6542.pdf

"During the manufacturing process, there is a possibility that the surface of the ball portion of the Front Suspension Ball Joint in your vehicle may have been scratched. "

Statement above^^^ is B.S. It's an attempt to make the problem seem lighter, UNLESS all Toyota engineers missed the root cause which is the design that puts the LBJ under tension as shown below.
Scratches may cause looseness and play but if LBJ were under compression like other designs, it will not PULL APART.
Therefore, the recall should not only apply to certain years but to all vehicles where the LBJ is under tension as shown below.

Attached Files
File Type: pdf
RCONL-05V225-6542_50J.pdf (13.8 KB, 193 views)

Last edited by RAD4Runner; 03-14-2019 at 12:32 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
matrad
86-95 Trucks & 4Runners
7
08-26-2024 09:21 AM
rwh2toyota
95.5-2004 Tacomas & 96-2002 4Runners
13
06-27-2015 06:39 PM
toy89yota
Vehicles - Trailers (Complete)
0
06-24-2015 02:18 PM
88Toy
95.5-2004 Tacomas & 96-2002 4Runners
7
06-17-2015 10:40 AM
2wdtundra
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
06-17-2015 02:41 AM



Quick Reply: Toyota Truck, 4Runner, Tundra Balljoint Failures



All times are GMT -8. The time now is 10:26 AM.