TJM vs ARB Bull Bars???????
#62
Contributing Member
Thread Starter
Join Date: Sep 2002
Location: Albuquerque, NM
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
I got my ARB Bumper delivered Monday. It was wedged standing on end in the entryway of my house. It was strapped to a smashed pallet with a single strand of plastic strapping.....LOL
Shipped via Central Freight Lines
The Hellas were wedged in with the bumper and miraculously survived
* I checked the box with the 2000 parts and all seems to be
there.
* I got a Chicago Electric 4.5" Angle Grinder and some cutting
disks last weekend.
* I found my 1/2" drill bits and am ready to install this weekend.
Last night I assembled the ARB turn signals just to get the small stuff done and out of the way. It would be nice to find a better set of these that are the same size and dimensions as the ARBs.
I looked over the wiring to my stock turn signals and noticed an extra unused cable with a plug strapped to the turn signal wire bundle on each side. Is that for the factory Fogs which I don't have on my Runner??
For the Hellas I went out and got a 6 gang fuse box,10 gauge wire, and a mini fuse blade holder to come off of the battery. This way I'll be set for any other future Mods.
Shipped via Central Freight Lines
The Hellas were wedged in with the bumper and miraculously survived
* I checked the box with the 2000 parts and all seems to be
there.
* I got a Chicago Electric 4.5" Angle Grinder and some cutting
disks last weekend.
* I found my 1/2" drill bits and am ready to install this weekend.
Last night I assembled the ARB turn signals just to get the small stuff done and out of the way. It would be nice to find a better set of these that are the same size and dimensions as the ARBs.
I looked over the wiring to my stock turn signals and noticed an extra unused cable with a plug strapped to the turn signal wire bundle on each side. Is that for the factory Fogs which I don't have on my Runner??
For the Hellas I went out and got a 6 gang fuse box,10 gauge wire, and a mini fuse blade holder to come off of the battery. This way I'll be set for any other future Mods.
#63
I am looking for a TJM T-17 or T-15 for a 1997 4Runner SR5. Which bumpers will work for my application? I have heard that some taco applications work well on 3rd gen runners. Secondly, where on this planet do you buy a TJM?
#64
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
06-11-2017 08:36 PM
WTB[PacNorWest]: Old Man Emu Torison Bars
A2theK
Axles - Suspensions - Tires - Wheels
2
10-14-2015 07:10 AM
mirabile4runner
Misc Stuff (Vehicle Related)
0
09-03-2015 07:15 AM