for those of you with lifted trucks...
#1
for those of you with lifted trucks...
what type of shocks do you have, and how much travel?
tomorrow i will be putting on some superlift shocks, about 15.5"-26.38" in length. the carquest ones on now are about 16"-21", so im hoping to gain some considerable droop. thats in the rear. in the front i have SAWs. i found the superlift shocks to be the best travel for the price, about $45 a piece. im curious to find out how they ride and what improvement they give me... also curious about what everyone else on the board has done with their rear shocks.
tomorrow i will be putting on some superlift shocks, about 15.5"-26.38" in length. the carquest ones on now are about 16"-21", so im hoping to gain some considerable droop. thats in the rear. in the front i have SAWs. i found the superlift shocks to be the best travel for the price, about $45 a piece. im curious to find out how they ride and what improvement they give me... also curious about what everyone else on the board has done with their rear shocks.
#4
I replaced my Superlift shocks with air shocks. Gabriel on the front and Monroe on the back.
The air-shocks on the front of my rig are sold for the rear of a 4-runner, I can't remember what year (2nd Gen I think). The air shocks on the rear of my rig are Monroe MA-733 and are sold for the 76-93 Dodge Ramcharger 4X4 and other pre 94 Dodge 4X4 models. The extended length is 26.25" and comp lenght is 15.5" . I have a 4 inch lift.
The air-shocks on the front of my rig are sold for the rear of a 4-runner, I can't remember what year (2nd Gen I think). The air shocks on the rear of my rig are Monroe MA-733 and are sold for the 76-93 Dodge Ramcharger 4X4 and other pre 94 Dodge 4X4 models. The extended length is 26.25" and comp lenght is 15.5" . I have a 4 inch lift.
Last edited by mt_goat; 01-07-2004 at 04:19 PM.
#5
mt_goat, how were your superlifts? they seem soft to me... softer than the skyjacker ones i just returned because they were not very long. 25.25"... saved $20.
toy283.. do you know the extended and compressed lengths? can you measure or something for me? ill check on the rancho site too. sounds better than what i got, if they are long enough...
edit: couldn't find the measurements on the site...:pat:
toy283.. do you know the extended and compressed lengths? can you measure or something for me? ill check on the rancho site too. sounds better than what i got, if they are long enough...
edit: couldn't find the measurements on the site...:pat:
Last edited by rowan; 01-08-2004 at 05:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
09-05-2015 07:52 PM
joeynational
86-95 Trucks & 4Runners
1
09-05-2015 02:54 PM