Are there any .5" rear spacer lifts? The smallest I have found is 1" (yes I searched)
#22
Registered User
Join Date: Nov 2005
Location: NOW, Havasu!
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Mine sits the same way, and unless "Someone who will remain unmentioned RooR" LoL ...was beating the hell out of the 890's I got, I think it's just the nature of the Tundra/OME lift. It sits totally level right now but I'd rather have just a tiny bit of rake to it. Of course I did use the Spacers up front, and I really dont want to pull them. So I bought a sheet of HDPE today and I'm just going to make a set of trim packers that are 1/2". I'll post up some pics as I build em' and get them on. UNR, just let me know if you want the other set I'll be making. After all, why buy 2 when I can build 4 for the same price!
#23
Contributing Member
Join Date: Nov 2006
Location: GSU/ATL/SD
Posts: 1,434
Likes: 0
Received 0 Likes
on
0 Posts
hahaha you're actually lucky jerry. those only had about 100 miles on them, all street (okay so a couple minor flex shots here and there, but i'll just call that breaking them in)
#25
Contributing Member
Thread Starter
Join Date: Apr 2004
Location: Los Angeles, CA
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
#26
Registered User
Join Date: Nov 2005
Location: NOW, Havasu!
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Welp, I got the HDPE yesterday, and got my homegrown spacers installed today. You can tell even though it's only 1/2". It's just what it needed, and the price was right too. I think an inch would have been too much, and I don't want to put any stresses on my OME's. I dont think a 1/2" is going to make anything sag faster more than the bumpstop would. After all were only taking about maybe a 1/4" thicker than the stops.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM