So the new Toyota got hit in the rear yesterday
#22
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
3 years in Wa but it can be extended if you are still dealing with the problem/pain
I will be going in to the doc to get a referal and then the chiropreactor or what not.
Stupid accident hurt.
I will be going in to the doc to get a referal and then the chiropreactor or what not.
Stupid accident hurt.
#23
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
#24
Registered User
Join Date: Mar 2008
Location: Allen, TX
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Phil, you have a '93 Corrado VR6?! Very cool! My brother almost bought one about a year ago. You don't see many in good shape anymore, and if you do they can be expensive. We've owned a bunch of VW's, but the Corrado will always be my favorite.
#25
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
I bought it about 7 years ago from a car dealership that had it in their wholesale lot for $2,000. They couldn't keep it running to take it to auction, so it sat for 6mths, they had taken it in on trade for $8,000.
The only thing wrong with it was a bad alt wire....the dumb 's couldn't figure it out, so it sat for ever.
it came with a nice paint job, full adj koni suspension, short shift kit, chip, intake, exhaust.
it only has 88,652 miles on it, I bought it with 84,000 on it. As you can see I don't drive it much.
I have added a ton of goodies on it, S/C kit, full fuel upgrade from the pump, lines, injectors, stand alone, schrick intake, wide band, and tons of other goodies
And I will be tearing it down this winter after we move, will be doing the 3.1 motor upgrade and AWD conversion to it, the drive line ext. kit for it, then I will have my monster about close to done....unless I want to do a newer digital cliamamatic heater conversion to it.
The only thing wrong with it was a bad alt wire....the dumb 's couldn't figure it out, so it sat for ever.
it came with a nice paint job, full adj koni suspension, short shift kit, chip, intake, exhaust.
it only has 88,652 miles on it, I bought it with 84,000 on it. As you can see I don't drive it much.
I have added a ton of goodies on it, S/C kit, full fuel upgrade from the pump, lines, injectors, stand alone, schrick intake, wide band, and tons of other goodies
And I will be tearing it down this winter after we move, will be doing the 3.1 motor upgrade and AWD conversion to it, the drive line ext. kit for it, then I will have my monster about close to done....unless I want to do a newer digital cliamamatic heater conversion to it.
Last edited by 4x4phil; 07-16-2008 at 08:51 AM.
#26
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
So I bought a new brush guard for my truck last night for $100
It is NICE!!! brand new shape, no dents or scrapes, nothing...
Now I just need to install it, find some nice lights, and figure a way to mount a winch on it.
here are some pics of it, but not on my truck, mine is silver
http://s201.photobucket.com/albums/a...oyotagrill.jpg
http://s201.photobucket.com/albums/a...yotagrill2.jpg
So now I should sell the Westin bar i just picked up.....unless I can fit it on to......ummmmmm that would look hella cool.....
oh well might just sell it...
It is NICE!!! brand new shape, no dents or scrapes, nothing...
Now I just need to install it, find some nice lights, and figure a way to mount a winch on it.
here are some pics of it, but not on my truck, mine is silver
http://s201.photobucket.com/albums/a...oyotagrill.jpg
http://s201.photobucket.com/albums/a...yotagrill2.jpg
So now I should sell the Westin bar i just picked up.....unless I can fit it on to......ummmmmm that would look hella cool.....
oh well might just sell it...
#27
Registered User
Join Date: Mar 2008
Location: Allen, TX
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
I bought it about 7 years ago from a car dealership that had it in their wholesale lot for $2,000. They couldn't keep it running to take it to auction, so it sat for 6mths, they had taken it in on trade for $8,000.
The only thing wrong with it was a bad alt wire....the dumb 's couldn't figure it out, so it sat for ever.
it came with a nice paint job, full adj koni suspension, short shift kit, chip, intake, exhaust.
it only has 88,652 miles on it, I bought it with 84,000 on it. As you can see I don't drive it much.
I have added a ton of goodies on it, S/C kit, full fuel upgrade from the pump, lines, injectors, stand alone, schrick intake, wide band, and tons of other goodies
And I will be tearing it down this winter after we move, will be doing the 3.1 motor upgrade and AWD conversion to it, the drive line ext. kit for it, then I will have my monster about close to done....unless I want to do a newer digital cliamamatic heater conversion to it.
The only thing wrong with it was a bad alt wire....the dumb 's couldn't figure it out, so it sat for ever.
it came with a nice paint job, full adj koni suspension, short shift kit, chip, intake, exhaust.
it only has 88,652 miles on it, I bought it with 84,000 on it. As you can see I don't drive it much.
I have added a ton of goodies on it, S/C kit, full fuel upgrade from the pump, lines, injectors, stand alone, schrick intake, wide band, and tons of other goodies
And I will be tearing it down this winter after we move, will be doing the 3.1 motor upgrade and AWD conversion to it, the drive line ext. kit for it, then I will have my monster about close to done....unless I want to do a newer digital cliamamatic heater conversion to it.
#28
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
#29
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Quick update, sounds like the truck will be done on next Wendsday. Wohoo!
then I can get that front bumper put on.
Still looking for a nice rear bumper for offroading, towing.
then I can get that front bumper put on.
Still looking for a nice rear bumper for offroading, towing.
#30
Registered User
Join Date: Mar 2008
Location: Allen, TX
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
#32
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
New update, went in and saw it yesterday, the bed was all the way off and frame is straight, the bed was painted, the cab was being sprayed.
First thought I had when I saw the bed off, was man I should do a body lift and Change those struts while this is off.
Oh well.
First thought I had when I saw the bed off, was man I should do a body lift and Change those struts while this is off.
Oh well.
#33
Registered User
Join Date: Mar 2008
Location: Allen, TX
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
#34
Registered User
Join Date: Mar 2008
Location: Allen, TX
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Glad your truck is almost back on the road!
#35
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
So I finally got the Toyota back yesterday, it looks great!
I just throw on my frnt brush gaurd last night (check out the aviater)
I got pics of the whole thing, but I can't get them to load up today....
I have my tube bumper in being sand blasted and then I will paint it and use until I find a nice rear bumper
I just throw on my frnt brush gaurd last night (check out the aviater)
I got pics of the whole thing, but I can't get them to load up today....
I have my tube bumper in being sand blasted and then I will paint it and use until I find a nice rear bumper
#38
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, WA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
here are some pics of the new front gaurd.
http://s201.photobucket.com/albums/a...0Tacoma%20TRD/
I just did the ISR and deck plate mod, after the first day of a bad idle (until the ECU fixed it's self) I love it! it sounds great, gives me some good extra power, the rear end flys around real easy now.
now im just waiting until I get my rear bumper all painted.
I want to get my stereo and video screen installed, but I just got a promaotion at work, we need to move out of state, so that comes first now. Darn it!!!
But more money now to play with the truck!
http://s201.photobucket.com/albums/a...0Tacoma%20TRD/
I just did the ISR and deck plate mod, after the first day of a bad idle (until the ECU fixed it's self) I love it! it sounds great, gives me some good extra power, the rear end flys around real easy now.
now im just waiting until I get my rear bumper all painted.
I want to get my stereo and video screen installed, but I just got a promaotion at work, we need to move out of state, so that comes first now. Darn it!!!
But more money now to play with the truck!
Thread
Thread Starter
Forum
Replies
Last Post
cchinny
General Electrical & Lighting Related Topics
6
06-25-2015 08:11 PM
Mr.Black
86-95 Trucks & 4Runners
3
06-21-2015 10:17 AM