95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Rancho RSX Shocks for 2nd Gen Cruiser Coil Lift

Thread Tools
 
Search this Thread
 
Old 08-30-2005 | 09:41 PM
  #1  
Keggo's Avatar
Thread Starter
Contributing Member
 
Joined: Oct 2004
Posts: 1,820
Likes: 1
From: Bakersfield, CA
Post Rancho RSX Shocks for 2nd Gen Cruiser Coil Lift

Hey guys... I was going to purchase some Rancho 9000's, but thought about it and decided to go with Rancho RSX self-adjusting shocks (for a few reasons). The part numbers/specs (that were as close to the Rancho 9000 combo that Praufet came up with) are as follows:

FRONT: RSX17079
Comp.: 10.375"
Ext.: 15.125"
Trav.: 4.75"

REAR: RSX17027
Comp.: 16.125"
Ext.: 27.625"
Trav.: 11.5"

I need to put them on and see how the ride is... I just wanted to show you guys in case you had any input on these shocks and also if any of you were thinking about doing the cruiser coil lift so you know there are other options out there... I spent forever pulling my hair out looking through the Rancho Shock specs to see what would fit and what wouldn't... I'll most likely have to modify the shock bushings to get them to fit, but... I Hope this is SOMEWHAT helpful! (I'll get pics and feedback once I get them on).

Last edited by Keggo; 08-30-2005 at 10:07 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 02:51 PM
terminator
Misc Stuff (Vehicle Related)
3
07-27-2015 08:13 PM
SMOD
86-95 Trucks & 4Runners
2
07-27-2015 02:45 PM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
07-06-2015 11:00 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 01:15 PM




All times are GMT -8. The time now is 09:19 PM.