PP Spring Lift & Bilsteins ?s
#21
Originally Posted by MTL_4runner
Use PB the night before and an air ratchet if you have one.
-B
#22
Registered User
Thread Starter
Join Date: Oct 2004
Location: Michigan
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Beerdrinker
I run 265/75x16 but I think i can fit 285/75x16's without any other mods. I have plenty of clearance with the 265's. i am going ot try in a couple of months when my tires wear down a little more.
#23
Contributing Member
Join Date: Aug 2003
Location: Tempe, AZ
Posts: 849
Likes: 0
Received 0 Likes
on
0 Posts
I did a quick search (you could probably find your answer in 5 mins; I spent 30 secs)- I didn't find the member I was thinking about. One guy on here had 285s and PP springs on for a week before putting on the OEM setup. He didn't rub on-road (but was sure he'd have issues).
Thread about PP springs and 285s
Thread about 1" body lift and 285s
You could also search 255/85 size tires as well. (i know its not on this topic; but if you're wanting tall tires w/o the rubbing)
Thread about PP springs and 285s
Thread about 1" body lift and 285s
You could also search 255/85 size tires as well. (i know its not on this topic; but if you're wanting tall tires w/o the rubbing)
#24
Registered User
Thread Starter
Join Date: Oct 2004
Location: Michigan
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Thanx Benni I didn't put to much effort into the question because Im going to stay with the 265s, I didn't think it was gonna happen without a BL, but now I know and knowing is half the battle.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
Jcrawl94
84-85 Trucks & 4Runners (Build-Up Section)
10
10-24-2015 04:34 PM