new member
#1
Registered User
Thread Starter
Join Date: May 2003
Location: NJ
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
new member
Just want to say hi,
moving here from the bimmer.org forum, I got a 03 4Runner less than 2 months ago to replace my '97 528iA
always wanted a Toyota truck and this one rocks....
(already approaching the 5K miles oil change and the smile is still on my face)
Cheers
moving here from the bimmer.org forum, I got a 03 4Runner less than 2 months ago to replace my '97 528iA
always wanted a Toyota truck and this one rocks....
(already approaching the 5K miles oil change and the smile is still on my face)
Cheers
#4
Registered User
Thread Starter
Join Date: May 2003
Location: NJ
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
No pics yet guys, stock Ti Silver
will post though when I get a bull bar etc
has anybody come out with something nice, the front bumber feels quite flimsy and needs some protection...he he he
Cheers
will post though when I get a bull bar etc
has anybody come out with something nice, the front bumber feels quite flimsy and needs some protection...he he he
Cheers
Trending Topics
#8
Registered User
Join Date: Feb 2003
Location: On the right coast
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the forum LC lite!!!
Your yotatech handle LC lite, is that stands for Land Cruiser lite? That is a good initial. Oh yeah, hope you are rich so you can buy some medication for a disease called "mod fever". Looks like you are already been bitten since you are beginning to talk to get a bull bar for your front bumper.
Again Welcome newbie!!
Don't forget to post some pics.
Noel
Your yotatech handle LC lite, is that stands for Land Cruiser lite? That is a good initial. Oh yeah, hope you are rich so you can buy some medication for a disease called "mod fever". Looks like you are already been bitten since you are beginning to talk to get a bull bar for your front bumper.
Again Welcome newbie!!
Don't forget to post some pics.
Noel
#10
Registered User
Thread Starter
Join Date: May 2003
Location: NJ
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
4x4CPOSEADOG,
very well done.....
LC Lite = Land Cruiser Lite
though it is really appropriate with this truck
No mod fever, not rich either, but I am thinking seriously about a bull bar or something for the front, somehow it feels very plasticy and flimsy.
Cheers
very well done.....
LC Lite = Land Cruiser Lite
though it is really appropriate with this truck
No mod fever, not rich either, but I am thinking seriously about a bull bar or something for the front, somehow it feels very plasticy and flimsy.
Cheers
#11
Registered User
Join Date: Feb 2003
Location: On the right coast
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by LC Lite
No mod fever, not rich either, but I am thinking seriously about a bull bar or something for the front, somehow it feels very plasticy and flimsy.
No mod fever, not rich either, but I am thinking seriously about a bull bar or something for the front, somehow it feels very plasticy and flimsy.
Noel
#12
Registered User
Thread Starter
Join Date: May 2003
Location: NJ
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I am serious about it, but I am also waiting for JAOS, ARB etc to finalize their offerings, not in a panic.
Still trying to come up with what fluids to use for engine oil etc...
Still trying to come up with what fluids to use for engine oil etc...
#13
Registered User
Join Date: Feb 2003
Location: On the right coast
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Posted by LC Lite
Still trying to come up with what fluids to use for engine oil etc
Still trying to come up with what fluids to use for engine oil etc
Go ahead do some break-in run first, then when you get to about 1k miles, change the oil to get rid of all the wear metals, then switch to Amsoil Synthetic oil and original Toyota filter that is made in Japan. When I bought my new Runner back in '94, I drove the runner on the freeway at 55 MPH and constantly check the speedo to make sure I don't past that limit. After I put about 1K on miles, I changed the oil to Amsoil synthetic, since then I use nothing but Amsoil synthetic 10w30 oil and OEM Toy filter. Now I have about 90K miles and the rig runs like I just bought it from the dealer yesterday. Oh man, I love it.
Noel
#14
Registered User
Thread Starter
Join Date: May 2003
Location: NJ
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Well,
break in procedure was followed to the dot, although my manual does not state any speed limit.
First 2K miles were mostly highway miles at varying speeds, with the trans in the 4 position for city driving, so I don't lug the engine.
Changed oil with dino at about 2 and 3K miles, used the Lexus filter the second time around.
Thinking to swich to M1 0W-40 at 5K miles.
Thanks for the suggestions
Cheers
break in procedure was followed to the dot, although my manual does not state any speed limit.
First 2K miles were mostly highway miles at varying speeds, with the trans in the 4 position for city driving, so I don't lug the engine.
Changed oil with dino at about 2 and 3K miles, used the Lexus filter the second time around.
Thinking to swich to M1 0W-40 at 5K miles.
Thanks for the suggestions
Cheers
#15
Registered User
Join Date: May 2003
Location: Whitefish, MT
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I'm doing the same thing on the new Taco. Just turned 1500 miles. Manual recommends 5k oil changes. I'm going to do the 1st change at 2k with dino as you did then start on synthetic at the 5k change. Still researching brand, weight, etc.
The only 2 break in recommendations in my manual were to avoid full throttle and running at a constant RPM for 1st 1k mi.
Enjoy your new ride.
The only 2 break in recommendations in my manual were to avoid full throttle and running at a constant RPM for 1st 1k mi.
Enjoy your new ride.
#17
Contributing Member
Join Date: Dec 2002
Location: Los Angeles, CA
Posts: 4,690
Likes: 0
Received 0 Likes
on
0 Posts
Welcome aboard LC
Good to hear that you got the new 4runner. The new 4runner is very offroad capable!! well except for the fact that it hovers inches off the ground but it still can hang with the other stock 4runners (older gens).
First off before you get a steel bumper, I'd say work on suspension:
Daystar Suspension: Spacers available summer
Revtek Suspension: Spacers available soon
OME: coil/shock (available maybe by september?)
Downey: coil/shock (available maybe by september?)
SAW: coilover (available maybe late summer?)
King: coilover (available maybe late summer?)
Good news on the ARB/OME products is that the prado available worldwide (except for the US) is now the same spec as the 03 4runners. So since ARB/OME pushes alot of products to their prado line, we should be seeing parts of us now that fits! Expect parts rolling in hopefully before the 04's roll out. This means suspension and bumpers!!
Once ya lift your 4runner, you can add some new booogers!
Lance
Good to hear that you got the new 4runner. The new 4runner is very offroad capable!! well except for the fact that it hovers inches off the ground but it still can hang with the other stock 4runners (older gens).
First off before you get a steel bumper, I'd say work on suspension:
Daystar Suspension: Spacers available summer
Revtek Suspension: Spacers available soon
OME: coil/shock (available maybe by september?)
Downey: coil/shock (available maybe by september?)
SAW: coilover (available maybe late summer?)
King: coilover (available maybe late summer?)
Good news on the ARB/OME products is that the prado available worldwide (except for the US) is now the same spec as the 03 4runners. So since ARB/OME pushes alot of products to their prado line, we should be seeing parts of us now that fits! Expect parts rolling in hopefully before the 04's roll out. This means suspension and bumpers!!
Once ya lift your 4runner, you can add some new booogers!
Lance
#18
Registered User
Originally posted by Good Times
Once ya lift your 4runner, you can add some new booogers!
Once ya lift your 4runner, you can add some new booogers!
My recommendation, use a kleenex!
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM