my 03 4runner with 20's (pics)
#45
RebuiltRunner my comment had nothing to do with you directly. So no offense taken from both sides i hope.
Zubaltec
very nice I like it alot, but that orange coil would irritate me. but overall very nice, and clean.
Chris
Zubaltec
very nice I like it alot, but that orange coil would irritate me. but overall very nice, and clean.
Chris
#46
#48
Thanks. Bilstein's with PP 1" lowering springs. The springs are for the 4X4 so I cut 1 coil off the front spring and left the back alone for know (cause there's not a good way of shorting the spring).
#49
Originally posted by impulsebrklyn
i dont even know what the hell those are for. Nor would i even put them under my tires as a ran them over.
i dont even know what the hell those are for. Nor would i even put them under my tires as a ran them over.
#50
Originally posted by Zubaltec
It's all about the 18's on the 3rd gen.
It's all about the 18's on the 3rd gen.
#52
Originally posted by Zubaltec
Thanks. Bilstein's with PP 1" lowering springs. The springs are for the 4X4 so I cut 1 coil off the front spring and left the back alone for know (cause there's not a good way of shorting the spring).
Thanks. Bilstein's with PP 1" lowering springs. The springs are for the 4X4 so I cut 1 coil off the front spring and left the back alone for know (cause there's not a good way of shorting the spring).
#53
They where an alum. color. I didn't like how they stuck out nor did I like the color. They where also like $40 a piece. I sent those back quick like. If your looking for a set let me know.
John
John
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 06:28 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 10:27 AM
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 07:39 AM