muhahahahhaha (pics inside)
#21
Senior Member
Thread Starter
Join Date: May 2002
Location: Binghamton, NY
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by casey
darn, ive been waiting to see this for a while now...
#22
Contributing Member
Join Date: Jun 2004
Location: Northern Virginia
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
I've got the Firestone Destinations too, they rock. You've got 12.5" s on a 7" rim??? What's going to happen when you deflate for wheeling? I've got 31" x 10.5" on a 6" rim and think I may go get 8" just so I dont blow the bead when I deflate. Does anyone have any experience with this?
#23
Senior Member
Thread Starter
Join Date: May 2002
Location: Binghamton, NY
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
There are a few poeple running 33ish-inch tires on 7" rims. General consensus is there are no problems as long as you don't go super soft. My previous tires were 32s on the same 7" rims. I aired down to 12-15PSI when wheeling and never had any problems. I'm thinking 15-20PSI should be fine with the 33s... just gotta be careful and see how things go.
#24
Originally Posted by 4runner4me
Nice tires. I have 33 12.50 (305/70/16)mtrs and they dont rub at all. I have a 2 inche body lift to help.
4.5 lift (2.5" OME, 1"cornfed front spacer, and 2" RB bl) Stubbs sliders
How does that work? I add that up and I get at least 4.5" of lift, if not more? How much lift are you actually getting out of that 1" CF spacer? What OMEs do you have up front? How is your CV angle with 305s? I've got the exact same lift as you seemingly w/o the 1" cornfed, but I bet I got 882s and you don't. Just looking at options to go to 315s on down the road. Thanks!
Nice pics guys!
#25
Senior Member
Thread Starter
Join Date: May 2002
Location: Binghamton, NY
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 4runner4me
Nice tires. I have 33 12.50 (305/70/16)mtrs and they dont rub at all. I have a 2 inche body lift to help.
#26
Registered User
Join Date: Jul 2003
Location: Old Line State
Posts: 1,045
Likes: 0
Received 0 Likes
on
0 Posts
I agree with Sabre, that looks very BEEFY. Nice job, I am glad your site is back up again. I refer to it often. I am still in the 32" tire club. I really like what you have done to your 4Runner.
#27
Body lift
Originally Posted by jacksonpt
Yea... I debating about what I want to do. I know I can do some griding to alleviate (sp?) the rubbing on the road, but I think it would take some significant grinding to avoid any rubbing off road. I'm pretty sure a BL is the best answer... now, 1" or 2...
The other issue I see is that if you do a body lift of 1" it will fix your sliders that bang on the pinch weld, seems like I remember that being an issue, but if you go 2" body lift it migth look a bit awkward. I'd still vote for the 2" body lift and see how the sliders look and reweld them if necessary cause the more clearance you got for those tires the better, especially since you are running a 305.
IMO stepping up from a 32 makes a big difference in the stance and looks of your rig, big difference!
#29
Senior Member
Thread Starter
Join Date: May 2002
Location: Binghamton, NY
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
Yea... I'm leaning towars the 1" BL right now, basically for aesthetic reasons. I don't want a huge gap between the body and my sliders or my TJM. The 1" BL should be enough to eliminate all rubbing up front, but I'll still rub in the back at least a little, but only when stuffed. I figure I can trim/bang/grind things enough to get me past that if necessary.
#30
Senior Member
Thread Starter
Join Date: May 2002
Location: Binghamton, NY
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sschaefer3
1" BL is a piece of cake a 2" is alot more work. 1" is all I would run personally.
On a side note... it looks like I might be in Tucson for Thanksgiving. If you are planning on doing any holiday wheeling and I can get away from the family, I'd love to ride along with you... see what things are like out there... if ya don't mind.
#31
Registered User
Join Date: Aug 2003
Location: Raleigh, NC
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
4Runner4Me's rig is pristine. And it'll stay that way. I'm not sure I'll ever be able to convince him to wheel with us, and as such, nothing's gonna rub his wheel wells!
#32
Yo
Originally Posted by WolfpackTLC
4Runner4Me's rig is pristine. And it'll stay that way. I'm not sure I'll ever be able to convince him to wheel with us, and as such, nothing's gonna rub his wheel wells!
Originally Posted by sschaefer3
1" BL is a piece of cake a 2" is alot more work. 1" is all I would run personally.
Last edited by waskillywabbit; 07-15-2004 at 06:59 AM.
#33
Senior Member
Thread Starter
Join Date: May 2002
Location: Binghamton, NY
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by waskillywabbit
Am I missing something here?
#34
2" Body lift
Originally Posted by jacksonpt
I believe you have to extend various things to clear the 2" BL... brake lines, shift cables, steering, etc.
#35
Guys, wide tires on narrow wheels makes it harder to lose a bead. I ran 12.50's on 7" wheels at single digit pressures a lot. When the wheel is narrower the bead has more pressure on it. Wide wheels suck
Jackson...looks great man!
Jackson...looks great man!
#37
Originally Posted by sschaefer3
Mmmmmmmmmmmmmmm, That Burrito looks good !!!
#39
Contributing Member
Join Date: Jun 2004
Location: Northern Virginia
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
OH Really now!
Originally Posted by Josh
Guys, wide tires on narrow wheels makes it harder to lose a bead. I ran 12.50's on 7" wheels at single digit pressures a lot. When the wheel is narrower the bead has more pressure on it. Wide wheels suck
Jackson...looks great man!
Jackson...looks great man!
Really? So I shouldn't be concerned about replacing my 6" tires that have 31 x 10.5"?
#40
Contributing Member
Join Date: Feb 2003
Location: CT
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Jackson,
The tires look sweet. I have a friend who has a set of 305 70 R16 tires that have been up for grabs for quite some time. He's selling cheap so I may have to get them after seeing your rig. I just need another set of rims. I can't understand how you aren't getting tons of rubbing with the backspacing of the stock wheels.
The tires look sweet. I have a friend who has a set of 305 70 R16 tires that have been up for grabs for quite some time. He's selling cheap so I may have to get them after seeing your rig. I just need another set of rims. I can't understand how you aren't getting tons of rubbing with the backspacing of the stock wheels.