Mikeys Hummer Custom Push Bar
#1
Registered User
Thread Starter
Mikeys Hummer Custom Push Bar
Well I've finally finsihed my custom Push Bar.
The bottom part is the stock toyota push bar, The top half is my CRAZY contraption. Its held on with 2 quick release pins, and than the whole top half folds forward.
I'd like to know your thoughts, comments, flames ?
Ill try and get the rest of the pics and write ups, up this weekend.
Just took a couple more pics at lunch time
The bottom part is the stock toyota push bar, The top half is my CRAZY contraption. Its held on with 2 quick release pins, and than the whole top half folds forward.
I'd like to know your thoughts, comments, flames ?
Ill try and get the rest of the pics and write ups, up this weekend.
Just took a couple more pics at lunch time
Last edited by 4Hummer; 11-12-2004 at 09:11 AM. Reason: added pics
#2
what is it for?
Has someone been using the tube bender/welder while drinking beer or hitting the bong ?
What exactly is it going to be used for? It looks like good, clean work, just wondering what is the purpose?
What exactly is it going to be used for? It looks like good, clean work, just wondering what is the purpose?
#4
Registered User
Thread Starter
Originally Posted by waskillywabbit
Has someone been using the tube bender/welder while drinking beer or hitting the bong ?
What exactly is it going to be used for? It looks like good, clean work, just wondering what is the purpose?
What exactly is it going to be used for? It looks like good, clean work, just wondering what is the purpose?
Um.. YES ! It's to protect the hood while wheeling in the brush. and well um. To make the truck look mean.
#5
Originally Posted by 4Hummer
Um.. YES ! It's to protect the hood while wheeling in the brush. and well um. To make the truck look mean.
#6
Registered User
Thread Starter
Originally Posted by shiftless89
For Looks? falling Rocks? Looks like a ton of welding!!
#7
Registered User
Thread Starter
I got the Idea from www.roadarmor.com and of course the H1 Hummer
Trending Topics
#9
Registered User
Thread Starter
Originally Posted by waskillywabbit
Well you got the hood exo'd, looks good, just do the rest of it...or did you pass out before that happened?
No next is a something like the pic below, Except with a reicever hitch and some nice BIG shackle mounts. and than some custom sliders.
http://www.allprooffroad.com/images/...per_back_l.jpg
#11
Registered User
Thread Starter
Originally Posted by snwbrdpunk16
Looks good, when are you gonna lift it?? that will make it look "meaner!"
#14
I like it. It's something different than the norm. Besides, weather it's usefull or not doesn't matter cause...custom mods rock!
I think you need to make another one for ILOVEMOUNTAINS and his deer killing phenomenon.
BTW: I live right by a National Gaurd Armory and all the H1's there (about 20-30 of em)have that same type gaurd.
I think you need to make another one for ILOVEMOUNTAINS and his deer killing phenomenon.
BTW: I live right by a National Gaurd Armory and all the H1's there (about 20-30 of em)have that same type gaurd.
#17
Registered User
Thread Starter
Originally Posted by mt_goat
I'd be a little concerned about the attachment point on the front fender if I were you. How did you support that?
It bolts right threw the fender with a plate on each side. Im trying to figure out a way to support the mout inside the fender a little more. However I did sit on it and it didn't bend !
#19
Contributing Member
Originally Posted by 4Hummer
It bolts right threw the fender with a plate on each side. Im trying to figure out a way to support the mout inside the fender a little more. However I did sit on it and it didn't bend !
#20
Registered User
Thread Starter
Originally Posted by mt_goat
That's what I was afraid of. The first time you hit something with that you are going to krinkle your fenders.
Wouldn't be the first time. ha ha ha
Yeah It will take a soft impact or some weight. But thats it for now. I'm fabbing something up as we speak. So it will be supported from inside the fender. I just need to figure out what Im going to tie it into. The frame would be Ideal. I will be installing a 3" body lift in a couple weeks so I'm waiting until that point before I make this support bracket. as it will change all the dimension's
But don't worry when its completely finished Ill be able to hit a deer without worries.