Installed 4crawler 1" Body Lift w/ Pics
#1
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Installed 4crawler 1" Body Lift w/ Pics
Just wanted to share my experience with everyone. I ordered my body lift from 4crawler and I am very happy with the results. Install was very smooth with the correct tools. One thing to look out for is ensuring that all of the body bolts are loosened up enough before trying to jack up a side. Might want to spray them down with some PB Blaster the night before, too. Well, on to the pics...
Before:
And After:
And just for fun, here's an interesting pic of the STi...
Before:
And After:
And just for fun, here's an interesting pic of the STi...
Last edited by MATT0404; 06-30-2007 at 05:37 PM.
#3
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Install took about 2 hours. No rubbing before the BL. I'm looking forward to seeing pics of your Pro Comp 285's when you get em' on.
Last edited by MATT0404; 06-30-2007 at 06:32 PM.
#7
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
89macrunner: The before shots were shot with my old canon 8.1mp s80 point and shoot. After pics were taken with my new Sony a100 DSLR. I am still very much a newb at photography, though. Thanks for the compliments!
neliconcept: Wow, they really do look alike.
neliconcept: Wow, they really do look alike.
Trending Topics
#13
Registered User
Join Date: Aug 2006
Location: Central Florida
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Matthew,
Great lookin Runner!
Quick question for ya though.
What suspension lift did you have on there with the 285's and stock wheels prior to the BL?
Thanks a million, I'm fixin to susp. lift mine this summer but want to keep my stock wheels with 285's also. (same wheels as yours)
James
Great lookin Runner!
Quick question for ya though.
What suspension lift did you have on there with the 285's and stock wheels prior to the BL?
Thanks a million, I'm fixin to susp. lift mine this summer but want to keep my stock wheels with 285's also. (same wheels as yours)
James
#14
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the comments everyone!
DSN46: Prior to the BL I just had Fabtech coilovers in the front and LC coils in the back. If you search some of my other posts you'll find some pics of a-arm clearance and ground clearance. I have no idea why 285's will fit some 4runners without rubbing and not others, but good luck. They'll look great!
DSN46: Prior to the BL I just had Fabtech coilovers in the front and LC coils in the back. If you search some of my other posts you'll find some pics of a-arm clearance and ground clearance. I have no idea why 285's will fit some 4runners without rubbing and not others, but good luck. They'll look great!
#18
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
I purchased the vehicle with the suspension lift in place. My rear shocks are also Fabtech's so it seems as though the coilovers were part of a system. I really haven't been able to find much info on these specific coilovers/lift combo on here.