Hi-beam headlights Indicator
#1
Registered User
Thread Starter
Join Date: Aug 2002
Location: Lincoln, NE
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Hi-beam headlights Indicator
I can see my hi-beam indicator when I have my headlights off and it is in the low-beam level. However, when I turn the headlights on (low-mean), it goes away.
What is wrong with it? Does anybody experience this?
What is wrong with it? Does anybody experience this?
#6
Contributing Member
Join Date: Aug 2002
Location: Home: Aurora, CO; Work: The People's Republic of Denver
Posts: 1,991
Likes: 0
Received 0 Likes
on
0 Posts
Mine does that as well since I disconnected the DRL's. It's feeding a small amount of power back through the circuit since the circuit isn't completely grounded. Mine goes off when I turn on the lights or switch my DRL's on. Might be something the dealer can fix. Keep us posted on what you find out.
#7
Registered User
Originally posted by rwmorrisonjr
It's feeding a small amount of power back through the circuit since the circuit isn't completely grounded.
It's feeding a small amount of power back through the circuit since the circuit isn't completely grounded.
Facing away from the high beam indicator...
Trending Topics
#8
Registered User
Join Date: Oct 2003
Location: Springfield, VA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
hi beam indicator problem - DRL
I am having the same problem with the high beam indicator coming on and off. It started 3 weeks after I disconnected the DRL by snipping wire 2 (and taping both ends) I believe in the DRL relay under the dash. The indicator goes away when I turn on the regular headlights as well. The rest of the time, the high beam indicator stays dim when the engine is turned off, but when it's running, it is weakly dimmed and comes on and off. It's annoying. Anybody who has experience this and knows what I can do to mitigate this issue, I would appreciate it. The dealer is no help. BTW, I have a 2001 4Runner. Thanks! Gary
#9
Registered User
Thread Starter
Join Date: Aug 2002
Location: Lincoln, NE
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Re: hi beam indicator problem - DRL
Originally posted by cribbs28
I am having the same problem with the high beam indicator coming on and off. It started 3 weeks after I disconnected the DRL by snipping wire 2 (and taping both ends) I believe in the DRL relay under the dash. The indicator goes away when I turn on the regular headlights as well. The rest of the time, the high beam indicator stays dim when the engine is turned off, but when it's running, it is weakly dimmed and comes on and off. It's annoying. Anybody who has experience this and knows what I can do to mitigate this issue, I would appreciate it. The dealer is no help. BTW, I have a 2001 4Runner. Thanks! Gary
I am having the same problem with the high beam indicator coming on and off. It started 3 weeks after I disconnected the DRL by snipping wire 2 (and taping both ends) I believe in the DRL relay under the dash. The indicator goes away when I turn on the regular headlights as well. The rest of the time, the high beam indicator stays dim when the engine is turned off, but when it's running, it is weakly dimmed and comes on and off. It's annoying. Anybody who has experience this and knows what I can do to mitigate this issue, I would appreciate it. The dealer is no help. BTW, I have a 2001 4Runner. Thanks! Gary
#10
Registered User
Join Date: Oct 2003
Location: Springfield, VA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
hi beam indicator problem - DRL
Yeah, please let me know how it goes. I haven't tried reconnecting the wires yet. I wonder if it's oxidation of the cut wires or something?
#11
Registered User
Thread Starter
Join Date: Aug 2002
Location: Lincoln, NE
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
I took my rig in the dealer today, after 8 hours they called and said that they couldn't find anything yet and would like to keep the truck there until Friday. I'll update when I get my rig back.
#12
Registered User
Join Date: Oct 2003
Location: Springfield, VA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
DRL
I would definitely be interested to find out if the dealer at your location find the culprit to the high beam light staying on. Looking forward to your post. Thanks again, and happy Thanksgiving!
#13
Contributing Member
Join Date: Jun 2002
Location: Akron/Cleveland, OH
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
I've got the same problem, and I also have a switch installed on the DRL's. I just kinda played it off and don't really worry about it. I can see the indicator bulb burning out with all this use though, so if there is a fix, I'd be interested.
#15
Registered User
Join Date: Mar 2003
Location: British Columbia
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Put a diode inline as Cebby suggested. It will either work or it wont. If it doesnt it wont harm anything. A diode is basically a device that allows current one way and not the other.
Last edited by zedex; 12-03-2003 at 09:30 PM.
#16
Contributing Member
Join Date: Jun 2002
Location: Akron/Cleveland, OH
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by zedex
Put a diode inline as Cebby suggested. It will either work or it wont. If it doesnt it wont harm anything. A diode is basically a device that allows current one way and not the other.
Put a diode inline as Cebby suggested. It will either work or it wont. If it doesnt it wont harm anything. A diode is basically a device that allows current one way and not the other.
Last edited by Toyota Punk; 12-04-2003 at 06:13 AM.
#17
Registered User
Join Date: Mar 2003
Location: British Columbia
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
I have no idea if it will work or not. As i dont know how toyota does their wiring but its worth a try. Diodes are cheap like borch and putting one inline will take about 2 minutes.
Or .. If the cut wire is looking for ground then you could put a resistor and diode to ground. The circuit would see ground and the high beam wouldnt light. The circuit would be open the other way. I would try it myself if i had done the mod. I should actually do the mod because hunting with DRL 's is no good.
Or .. If the cut wire is looking for ground then you could put a resistor and diode to ground. The circuit would see ground and the high beam wouldnt light. The circuit would be open the other way. I would try it myself if i had done the mod. I should actually do the mod because hunting with DRL 's is no good.
#18
Registered User
Thread Starter
Join Date: Aug 2002
Location: Lincoln, NE
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
As I've promised.
After left the rig 3 long days at the dealer, they called me and said that "There is NO TSB for disconnectig the DRL on 2002 model". Therefore, they couldn't fix the problem. However, they reconnected my DRL and the problem went away.
I intentionally disconnected the DRL and now they reconnected it. What a dumb.
After left the rig 3 long days at the dealer, they called me and said that "There is NO TSB for disconnectig the DRL on 2002 model". Therefore, they couldn't fix the problem. However, they reconnected my DRL and the problem went away.
I intentionally disconnected the DRL and now they reconnected it. What a dumb.