Gutter Guard grill
03-26-2003 | 01:55 PM
#2
Contributing Member
Joined: Feb 2003
Posts: 316
Likes: 0
From: Ireland
Lookin' good!
I did this mod a couple of weeks ago. Took a couple of hours as i wanted it as flawless as possible. Must have taken you quite a bit longer cause you had three to do! Did you use cable ties to hold them in or did u fibreglass?
Delboy
I did this mod a couple of weeks ago. Took a couple of hours as i wanted it as flawless as possible. Must have taken you quite a bit longer cause you had three to do! Did you use cable ties to hold them in or did u fibreglass?
Delboy
03-26-2003 | 09:23 PM
#5
Thread Starter
Registered User
Joined: Feb 2003
Posts: 698
Likes: 0
From: James Island/ChuckTown, SC
I used either 18 or 24 gauge picture hanging wire. It worked great! All you have to do is spend the time twisting it and holding the grill in place at the same time. I was the only one working on this and it was a pain but well worth it. I know have friends wanting me to do it to their rides.
Trending Topics
Where did you get it? good work.
04-12-2003 | 10:37 AM
#9
Contributing Member
Joined: Sep 2002
Posts: 801
Likes: 0
From: Albuquerque, NM
One more Gutter Mod done!!!
It looks good with the "Carbon Fiber" Hood Deflector
You can get the Toyota front license plates here....
http://www.auto-attire.com/toylicplat.html
It looks good with the "Carbon Fiber" Hood Deflector
You can get the Toyota front license plates here....
http://www.auto-attire.com/toylicplat.html
Last edited by ALBPM; 04-12-2003 at 10:49 AM.
Thread
Thread Starter
Forum
Replies
Last Post
smilen724
86-95 Trucks & 4Runners (Build-Up Section)
13
11-08-2015 05:11 PM
bryan34w
Buying & Selling Advice - Feeler/Gauging Interest
12
09-30-2015 03:50 PM
