FINALLY...lifted my 4runner
#1
Registered User
Thread Starter
Join Date: Oct 2007
Location: San Luis Obispo, CA
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
FINALLY...lifted my 4runner
had the stuff in my garage for 3 months finally did the install bought new tires to go with it
ok before:
when i brought it home
added 2"Bl, clear corners, and tinted windows
INSTALL:
RIGHT OUT OF THE SHOP:
FINAL PRODUCT IN DRIVEWAY JUST ALIGNED:
I LOVE IT!!
ok before:
when i brought it home
added 2"Bl, clear corners, and tinted windows
INSTALL:
RIGHT OUT OF THE SHOP:
FINAL PRODUCT IN DRIVEWAY JUST ALIGNED:
I LOVE IT!!
#2
Registered User
Nice work Brandon! Thats a very stout looking rig now. It was a much need overhaul. Looked like the install went well and its riding good now!
List up the specs on the lift!
List up the specs on the lift!
#5
Registered User
Thread Starter
Join Date: Oct 2007
Location: San Luis Obispo, CA
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
ok specs umm lets see, i didnt measure beforehand but now:
- F driver fender measures 40.125" from ground to center of fender
- F pass fender = 40.25"
- R driver fender = 40.5"
- R pass fender = 40.75"
pretty close pretty level. I have the OME 890's in the rear, SAWs up front cranked with about 1 7/8" of thread showing.
Handles good, the rear is a little rougher than stock not bad though, im glad i got the n86C shocks.
Trending Topics
#10
Registered User
Thread Starter
Join Date: Oct 2007
Location: San Luis Obispo, CA
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered User
Thread Starter
Join Date: Oct 2007
Location: San Luis Obispo, CA
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered User
Thread Starter
Join Date: Oct 2007
Location: San Luis Obispo, CA
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM