cruzin performance opinions
#1
cruzin performance opinions
hey all,
i just got my injectors back from cruzin performance and the guy gave really good service. my injectors were cleaned (inside and out), all o-rings and caps were replaced, and a full flow test before cleaning and after. plus ups insured shipping all for $58.00. when i got my injectors backs they were even heat sealed in their own little packages.
so if you need clean injectors do no hesitate to trust cruzin performance, i am more than happy.
i just got my injectors back from cruzin performance and the guy gave really good service. my injectors were cleaned (inside and out), all o-rings and caps were replaced, and a full flow test before cleaning and after. plus ups insured shipping all for $58.00. when i got my injectors backs they were even heat sealed in their own little packages.
so if you need clean injectors do no hesitate to trust cruzin performance, i am more than happy.
#7
I can also vouch for Cruzin Performance.
I got my injectors for my old modified RX-7 cleaned for free because it took him awhile to find the right adapters so my injectors would fit since the injectors were 850cc gallery feed (or side feed).
The owner kept in good communication with me the whole time.
He really tries to give the best service.
J
I got my injectors for my old modified RX-7 cleaned for free because it took him awhile to find the right adapters so my injectors would fit since the injectors were 850cc gallery feed (or side feed).
The owner kept in good communication with me the whole time.
He really tries to give the best service.
J
Trending Topics
#8
Originally Posted by AJatx
He really tries to give the best service.
I had someone else telling me just yesterday good luck with $12 per injector, because "you get what you pay for". I think he either manages a dealer shop or owns a dealership. He was trying to tell me that a HG replacement should be $3000!
#9
I think Cruzin is a good business. I've had email communication with him (Rich Jensen) as he tried to acquire the right adapters for my injectors. At least he's set up for large side feed injectors.
Another good vendor while we're on the subject is RC Engineering.
My friend and I had a batch of injectors inspected, cleaned, and flow tested.
These guys are fast and professional as well.
J
Another good vendor while we're on the subject is RC Engineering.
My friend and I had a batch of injectors inspected, cleaned, and flow tested.
These guys are fast and professional as well.
J
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
Pre 84 Trucks
21
07-03-2023 04:03 AM
kbpickens
Newbie Tech Section
5
10-02-2015 04:37 PM
JookUpVandetti
86-95 Trucks & 4Runners
10
09-30-2015 09:58 AM