Been a while... Here's the progress.
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
Been a while... Here's the progress.
I haven't posted in quite a while. I've been busy either working on the runner or working so I decided to post some pics of the latest mods.
I made some custom tube doors:
Completed:
Put to use
I also have done some other tube work the rear quarter protection and front fender bar. I also modified my old bumper slightly.
Rear:
Bumper:I'm still working on the turn signals..
I made an interior roll cage:
I also put in an inchworm dual crawler with 4.7 gears. This thing makes all the diference off-road. One of my best purchases by far:
I put in hydro assist a little while ago also. Makes turning extremely easy. I kept blowing power steering pumps before getting it.
Just a few other pics flexing from this weekend:
I made some custom tube doors:
Completed:
Put to use
I also have done some other tube work the rear quarter protection and front fender bar. I also modified my old bumper slightly.
Rear:
Bumper:I'm still working on the turn signals..
I made an interior roll cage:
I also put in an inchworm dual crawler with 4.7 gears. This thing makes all the diference off-road. One of my best purchases by far:
I put in hydro assist a little while ago also. Makes turning extremely easy. I kept blowing power steering pumps before getting it.
Just a few other pics flexing from this weekend:
#4
Contributing Member
Join Date: Dec 2005
Location: Houston (home), Atlanta (school), Cincinnati (work)
Posts: 2,226
Likes: 0
Received 0 Likes
on
0 Posts
that all looks awesome. the first pic of the tube doors i was like "eh", but seeing them painted up and in action they look sweet. you have some awesome stuff on that rig. good work
Trending Topics
#10
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
#11
Contributing Member
Join Date: Nov 2006
Location: GSU/ATL/SD
Posts: 1,434
Likes: 0
Received 0 Likes
on
0 Posts
so many questions but i'll just start with the doors
i've actually been mapping out some tube welded doors myself, although a little bit differen't design than yours. I was wondering if you would be willing to refab a set of those, or if you had the blueprints to create another set?
i've actually been mapping out some tube welded doors myself, although a little bit differen't design than yours. I was wondering if you would be willing to refab a set of those, or if you had the blueprints to create another set?
#13
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the compliments.. It is a money and time pit..
My wife is already about to kill me, with all the time I spend and the mess I make out of the garage. I probably shouldn't be doing too much fabing for a while. I didn't draw anything this time before I made them. I had a basic concept and completed the design while I was building them. I could send you some basic dimentions if you wanted them.
so many questions but i'll just start with the doors
i've actually been mapping out some tube welded doors myself, although a little bit differen't design than yours. I was wondering if you would be willing to refab a set of those, or if you had the blueprints to create another set?
i've actually been mapping out some tube welded doors myself, although a little bit differen't design than yours. I was wondering if you would be willing to refab a set of those, or if you had the blueprints to create another set?
#16
Contributing Member
very nice ...why not make the corner lights into blinkers just buy some 1157 bulb sockets and some amber leds i did that to my bumper lights looks nice when they light up with the corners
#17
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
I think I am going to convert the corners into blinkers... Havn't quite decided yet..
#18
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts