backspacing wheels
#21
Actually, I was looking at these rims:
http://www.toyota-parts.com/PD-PTR20....aspx?MakeID=1
I've never seen a picture of these rims on a 4runner or tacoma, though. The mickey thompson classics would be great if they didn't rub the calipers.
http://www.toyota-parts.com/PD-PTR20....aspx?MakeID=1
I've never seen a picture of these rims on a 4runner or tacoma, though. The mickey thompson classics would be great if they didn't rub the calipers.
#22
Actually, I was looking at these rims:
http://www.toyota-parts.com/PD-PTR20....aspx?MakeID=1
I've never seen a picture of these rims on a 4runner or tacoma, though. The mickey thompson classics would be great if they didn't rub the calipers.
http://www.toyota-parts.com/PD-PTR20....aspx?MakeID=1
I've never seen a picture of these rims on a 4runner or tacoma, though. The mickey thompson classics would be great if they didn't rub the calipers.
Here's a old shot of Blake's 4Runner with those TRD rims before he traded them with Ric: Blake's 4Runner
Here's a shot of Ric's 4Runner now with the same wheels: Ric's 4Runner
Are you sure the M T classics rub the calipers? There's quite a few guys here running these rims w/ larger than stock tires. A simple search turned up the following:
I know Darren's running the Classic IIs w/o any problems: Darren's 4Runner
So is Lee: Lee's 4Runner
Oh and here's a shot of Tommy's 4Runner w/ the Classic Locks: Tommy's 4Runner
There are more, just didn't feel the need to post all of them.
Last edited by Rock Slide; 06-11-2007 at 05:17 AM.
#23
Thanks - I was reading all of Blake's threads last night. He did quite a bit of moding on his 4runner. The TRD rims look good and probably work well with 285 tires.
Darren's 4runner website almost convinced me to go with a 2 to 3 inch lift. His 4runner looks awesome. I did read that he had to use wheel spacers to make the MT rims work.
Anyway, it's all very tempting, but I think I'm going to stick with a mild lift via 99 springs. The springs just arrived today, and I just need to find a shop to install them now.
Darren's 4runner website almost convinced me to go with a 2 to 3 inch lift. His 4runner looks awesome. I did read that he had to use wheel spacers to make the MT rims work.
Anyway, it's all very tempting, but I think I'm going to stick with a mild lift via 99 springs. The springs just arrived today, and I just need to find a shop to install them now.
Thread
Thread Starter
Forum
Replies
Last Post
Up&Down
95.5-2004 Tacomas & 96-2002 4Runners
8
08-05-2015 06:20 AM
Luvmeye22re
95.5-2004 Tacomas & 96-2002 4Runners
1
08-04-2015 03:53 PM
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
07-06-2015 07:45 PM