Anyone up to helping?
#121
Contributing Member
Originally Posted by callmej75
Have you got that intake pipe in yet?
Last edited by cootees; 10-24-2005 at 03:52 PM.
#122
Contributing Member
Thread Starter
Join Date: Feb 2004
Posts: 2,518
Likes: 0
Received 0 Likes
on
0 Posts
Couldn't do much tonight because I'm at a stand still til the head bolts arrive tomorrow. Snapped some pics of the fuel rails and some of my fancy blue wire loom.
#123
Contributing Member
Join Date: Oct 2004
Location: B'ham, WA
Posts: 1,817
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by callmej75
Just got it yesterday! Thanks a bunch man...oh and the old lady thought I had a letter from a girlfriend so I was teasing her about it and I finally gave it up to her and she only found a gasket inside hahaha
#124
Contributing Member
Thread Starter
Join Date: Feb 2004
Posts: 2,518
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Silver_Truck
Haha...Ya the only envelope I had around was one from a birthday card...More pics! Looks good, you may have been able to get away with using the same bolts since they hadn't been heat cycled but better safe then sorry
#126
Contributing Member
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
The POS seller said this:
I stated in my add that I was not a mechanic and that I did not know much about these heads. I also said that I had not installed them so I could not no. They stayed in the original boxes until I sold them to you. Here is the exact copy of my add:
THIS IS A PAIR OF REBUILT CYLINDER HEADS I BOUGHT ON EBAY FOR MY 1993 TOYOTA 4RUNNER. I HAVE SINCE SOLD MY 4RUNNER AND NEVER INSTALLED THESE HEADS. I JUST DID NOT HAVE THE TIME TO REPAIR MY TRUCK. THANK YOU, VIX
THE FOLLOWING IS THE DESCRIPTION FROM THE ORIGINAL AUCTION THAT I PURCHASED THEM FROM. PLEASE NOTE THAT I AM NOT A MECHANIC AND I DON'T KNOW MUCH MORE ABOUT THESE HEADS, BUT I WILL TRY TO ANSWER YOUR QUESTIONS AS BEST I CAN.
THIS AUCTION IS FOR A COMPLETELY REBUILT SET OF 3.0 TOYOTA SOHC CYLINDER HEADS. THESE HEADS WILL FIT 3.0 ENGINES FROM 88-95. THESE HEADS HAVE A 3 ANGLE VALVE JOB, PRESSURE TESTED, RESURFACED, & NEW VALVE STEM SEALSINSTALLED. AS YOU CAN SEE THESE HEADS ARE IN LIKE NEW CONDITION AND ARE AS GOOD AS THEY LOOK.
I have highlighted the part in red which states that I am not a mechanic and I don't know much more about these heads. I also state in my payment instructions and return policy that I don't offer returns or warranties, this is a copy of it:
....
Sorry, but there is nothing more I am responsible for. VIX
I stated in my add that I was not a mechanic and that I did not know much about these heads. I also said that I had not installed them so I could not no. They stayed in the original boxes until I sold them to you. Here is the exact copy of my add:
THIS IS A PAIR OF REBUILT CYLINDER HEADS I BOUGHT ON EBAY FOR MY 1993 TOYOTA 4RUNNER. I HAVE SINCE SOLD MY 4RUNNER AND NEVER INSTALLED THESE HEADS. I JUST DID NOT HAVE THE TIME TO REPAIR MY TRUCK. THANK YOU, VIX
THE FOLLOWING IS THE DESCRIPTION FROM THE ORIGINAL AUCTION THAT I PURCHASED THEM FROM. PLEASE NOTE THAT I AM NOT A MECHANIC AND I DON'T KNOW MUCH MORE ABOUT THESE HEADS, BUT I WILL TRY TO ANSWER YOUR QUESTIONS AS BEST I CAN.
THIS AUCTION IS FOR A COMPLETELY REBUILT SET OF 3.0 TOYOTA SOHC CYLINDER HEADS. THESE HEADS WILL FIT 3.0 ENGINES FROM 88-95. THESE HEADS HAVE A 3 ANGLE VALVE JOB, PRESSURE TESTED, RESURFACED, & NEW VALVE STEM SEALSINSTALLED. AS YOU CAN SEE THESE HEADS ARE IN LIKE NEW CONDITION AND ARE AS GOOD AS THEY LOOK.
I have highlighted the part in red which states that I am not a mechanic and I don't know much more about these heads. I also state in my payment instructions and return policy that I don't offer returns or warranties, this is a copy of it:
....
Sorry, but there is nothing more I am responsible for. VIX
#127
Contributing Member
Thread Starter
Join Date: Feb 2004
Posts: 2,518
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FilthyRich
The POS seller said this:
I stated in my add that I was not a mechanic and that I did not know much about these heads. I also said that I had not installed them so I could not no. They stayed in the original boxes until I sold them to you. Here is the exact copy of my add:
THIS IS A PAIR OF REBUILT CYLINDER HEADS I BOUGHT ON EBAY FOR MY 1993 TOYOTA 4RUNNER. I HAVE SINCE SOLD MY 4RUNNER AND NEVER INSTALLED THESE HEADS. I JUST DID NOT HAVE THE TIME TO REPAIR MY TRUCK. THANK YOU, VIX
THE FOLLOWING IS THE DESCRIPTION FROM THE ORIGINAL AUCTION THAT I PURCHASED THEM FROM. PLEASE NOTE THAT I AM NOT A MECHANIC AND I DON'T KNOW MUCH MORE ABOUT THESE HEADS, BUT I WILL TRY TO ANSWER YOUR QUESTIONS AS BEST I CAN.
THIS AUCTION IS FOR A COMPLETELY REBUILT SET OF 3.0 TOYOTA SOHC CYLINDER HEADS. THESE HEADS WILL FIT 3.0 ENGINES FROM 88-95. THESE HEADS HAVE A 3 ANGLE VALVE JOB, PRESSURE TESTED, RESURFACED, & NEW VALVE STEM SEALSINSTALLED. AS YOU CAN SEE THESE HEADS ARE IN LIKE NEW CONDITION AND ARE AS GOOD AS THEY LOOK.
I have highlighted the part in red which states that I am not a mechanic and I don't know much more about these heads. I also state in my payment instructions and return policy that I don't offer returns or warranties, this is a copy of it:
....
Sorry, but there is nothing more I am responsible for. VIX
I stated in my add that I was not a mechanic and that I did not know much about these heads. I also said that I had not installed them so I could not no. They stayed in the original boxes until I sold them to you. Here is the exact copy of my add:
THIS IS A PAIR OF REBUILT CYLINDER HEADS I BOUGHT ON EBAY FOR MY 1993 TOYOTA 4RUNNER. I HAVE SINCE SOLD MY 4RUNNER AND NEVER INSTALLED THESE HEADS. I JUST DID NOT HAVE THE TIME TO REPAIR MY TRUCK. THANK YOU, VIX
THE FOLLOWING IS THE DESCRIPTION FROM THE ORIGINAL AUCTION THAT I PURCHASED THEM FROM. PLEASE NOTE THAT I AM NOT A MECHANIC AND I DON'T KNOW MUCH MORE ABOUT THESE HEADS, BUT I WILL TRY TO ANSWER YOUR QUESTIONS AS BEST I CAN.
THIS AUCTION IS FOR A COMPLETELY REBUILT SET OF 3.0 TOYOTA SOHC CYLINDER HEADS. THESE HEADS WILL FIT 3.0 ENGINES FROM 88-95. THESE HEADS HAVE A 3 ANGLE VALVE JOB, PRESSURE TESTED, RESURFACED, & NEW VALVE STEM SEALSINSTALLED. AS YOU CAN SEE THESE HEADS ARE IN LIKE NEW CONDITION AND ARE AS GOOD AS THEY LOOK.
I have highlighted the part in red which states that I am not a mechanic and I don't know much more about these heads. I also state in my payment instructions and return policy that I don't offer returns or warranties, this is a copy of it:
....
Sorry, but there is nothing more I am responsible for. VIX
#128
Contributing Member
Originally Posted by callmej75
I would just leave negative feedback and be done with it. All problems cured so I can start the assembly. Live and learn dude...thats all we can do! Thanks Eric
Unless he stated that in the auction that the heads are being sold "as-is" then you can still do a paypal dispute for faulty/defective equipment. It would at least put his money on hold and paypal will do an investigation over it. Meanwhile he may reason up once he sees that you are serious about it and try to work out something. Even a little bit of money back would help since you had to replace parts on that "fully rebuilt" head.
#129
Contributing Member
Thread Starter
Join Date: Feb 2004
Posts: 2,518
Likes: 0
Received 0 Likes
on
0 Posts
STRIPPED BEARING CAP BOLT.....small block ford...small block ford...i should have done it! Well its helicoil time. In the meantime I'm saving for that 302. It will happen now John! Well gotta wait til Friday til I get the helicoil so Philip if you are up to it I'm gonna have another wrench-a-thon Saturday.
#134
Contributing Member
Thread Starter
Join Date: Feb 2004
Posts: 2,518
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by runnerboy97
lookin really good. glad to see that its all workin out for ya.
#135
Registered User
Join Date: Dec 2004
Location: Peterborough Ontario
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
Holy, I just read this thread from start to finish.
Sorry to see you have such bad luck callmej75, happy to see it's starting to turn around for you though.
Sorry to see you have such bad luck callmej75, happy to see it's starting to turn around for you though.
#136
Contributing Member
Thread Starter
Join Date: Feb 2004
Posts: 2,518
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Yota4runner
Holy, I just read this thread from start to finish.
Sorry to see you have such bad luck callmej75, happy to see it's starting to turn around for you though.
Sorry to see you have such bad luck callmej75, happy to see it's starting to turn around for you though.
#137
Registered User
Join Date: Dec 2004
Location: Peterborough Ontario
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by callmej75
Bad luck is my middle name...we shall see the true verdict tomorrow when I crank it for the first time in 2 months!
#138
Registered User
Join Date: Mar 2004
Location: Salem,Oregon
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by callmej75
Thanks...if I start it up and it smokes then I will have one purty 3.0 for sale and investing in my 5.0! Made me a cam gear tool from a steel shelf bracket from 84 lumber and I straightened it out in the vise and drilled it and put 2 screws in it. Worked like a charm
It should smoke for a little while any how. It will probably smoke from just about every surface on it from handling everything when you installed it.
#139
Contributing Member
Thread Starter
Join Date: Feb 2004
Posts: 2,518
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ganoid
It should smoke for a little while any how. It will probably smoke from just about every surface on it from handling everything when you installed it.