You guys please use my email address to contact me stubbswelding@yahoo.com

It is very easy for me to miss PM's- I will check whatever is there right now though. Make sure you state the YT super small & very short discount price lol. This is not really a group buy just a short time deal for whomever it will help- no numbers qouta!

Oh, and yes they are all weld on. The scab plates are included.

Richard


Peter- you need another set!? Email me, and I'll we'll sort it out.

Jonathan- send me another picture. I have no idea what happend to your truck. My wife is the website girl as I am web page challanged....

 

Haha, no prob Richard, I'll send one to you soon.

 

Done

 

rob,

i had the same dilemma. the 15 and 30 degree slope models protect just as well. of course, the 15 degrees stick out a little farther than the 30 degree model (assuming the outriggers are the same length).

i chose the 15 degree model b/c they are easier to step on and off of.

bob

 

YT members- I have recieved a much higher than expected numbers of emails concerning this, and it all pretty much revolves around shipping costs. I thought it would be best to give you a fixed shipping cost.


$26 Western States (entire west coast,AZ, Nv UT,NM etc.)

$38 Central States (Rockies basically)

$49 Eastern States. Anything East of Colorado.


Remember this is for the standard model only (No Tundras are inlcuded in this), and since someone had asked about Deluxes I will give 12% off our website prices on those (Shipping costs on deluxes averages about $7 more due to weight)

I am going to close this all up tomorrow at 5:00 or so in the afternoon.

So heres what you are all looking at:


All 4runner models except 03/04 $193.50

03/04 4runners $198.90

All years short bed trucks-regular cab(including tacoma) $193.50

All xcab/Dcab trucks (including tacoma xcab) $204.30

Just add the above shipping , and if you are in CA remember to add 7.25% sales tax to the slider.

Paypal is my preferred method of payment- however if you want to send a check thats fine too. Just make sure you let me know that you are doing this.

Richard

 

agreed Bob, thanks

Richard, check your email, I will be sending paypal for a set tomorrow for sure. Thanks for the YT discount

 

so bolt on is only possible with the Bomber model

 

Actually the bombers still have to weld on the mounts. The Slider then fits into those mounts, and is then bolted in.

Truthfully - To buy those is kind of a waste of money. Trust me when I say you'll probably never remove the sliders from the rig. They can be "touched up" while on the truck etc. If you had to remove welded on versions it takes very little time with a sawzall- which by the way removing them is the "other" reason for using scab plates.

At this point there is only one truck that has to have bolt ons, and those are the 4th gen 4runners with xreas suspension.

I am not anti bolt on I am just anti expensive rock sliders. period.

RS

 

On the deluxe, I see that the inner rail is square, whats the advantage?

 

None! Well actually it is slightly stronger but not to the point of being better than the standard all round tube. It simply is a matter of looks the standard wont outperform the deluxe & vise versa.
It really come down to the customers preference All Round or Sqaure/Round combo. The deluxes cost more since the tubing costs more, and they actually take more time to build. My hands down personal favorite is the standard due to:

overall cost
Strength
Light weight

All of those things are very important to me.

 

ahhh crap i wish i would have done my tax return earler.

 

No worries my friend we always try to do some kind of deals for yt members.
There will always be a next time!
RS

 

thx man.

 

Richard, what a great deal! Thanks for taking care of us YT guys. I sent my money via paypal this morning. Your sliders are the first large mod my truck gets!!

 

so is a standard with the 15 degree available for a 92 xcab?

 

thanks for the info. I was just liked the ability to take them off if needed.

 

YES!

Roadtripper- No problem.


Everyone else- I have been slammed with orders- a few who were not YT members got the same deal since I thought they were coming from here! Anyhow I told them to come on over, and join up.

I am going to try to have everything out next week - however at this point we maybe falling into the week after that so please take this into consideration before ordering. I dont want anyone to be unhappy!



Anyone who wants in on this has only a couple of hours left. I will be getting to work right now so if you want to be in post up or email before 5pst.

I most likely will not be able to answer till later tonight.

Thanks all of you!
Richard

 

Richard,

Take your time with mine. My work schedule is packed over the next month so I won't have a chance to get them on 'til early March anyway.

 

Well this is officially over now!!!

For anyone else looking to get into our sliders on the cheap remember we do those Ebay auctions, and we always have a really good deals going in the vendor section here on YT. The turn out on this short sale was pretty darn good, and I will take that into consideration for another one maybe in March. The thing that will always be in the way are steel prices- if we can get better deals to pass on to you we will.

Thanks again you guys,
Richard