AllPro rocks!!!!
#1
Registered User
Thread Starter
Join Date: Jan 2004
Location: Phoenix
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
AllPro rocks!!!!
Well last november I bought a new v-6 third member from Allpro to replace my very well exploded 4 cylinder third member. Everything was fine untill about a week ago when I pulled into Lowes and heard a clunk from the rear of the truck. I really didnot think anything of it,kinda sounded like I just ran over a man hole cover. Well as I pulled out of lowes I felt and heard a clunk!!
So I stopped my runner and looked around under at the drive train. Felt and saw nothing aparently wrong. So I drove home. The drive home my runner ran great! No clunks or anything. I got home pulled in the driveway walked around to the back to get some stuff out of the back and noticed that the whole back window area was spayed with oil. Well I looked down at the back of my diff and saw a big 1/2" hole at the top left of the housing!!!!
The next day after work I pulled out the third member and found what had cause the hole. About 4to 5 of the ring gear bolts had came loose and fallen out!! So I called Allpro and talked to Jay and Mike and the said for me to ship it to them. I talked to them on friday and the are fixing it for free.
I 'am glad to see some aftermarket off road vendors are standing behind there products.Sorry no pictures off the carnge to put up here I took the pichures with my 35mm camrea( I don't own a digital camrea yet).
I should have I back on tuesday 8/10.
Greg
P.S. Hole in the diff housing was welded close by a buddy at his work. Cost one 12pk of beer!
So I stopped my runner and looked around under at the drive train. Felt and saw nothing aparently wrong. So I drove home. The drive home my runner ran great! No clunks or anything. I got home pulled in the driveway walked around to the back to get some stuff out of the back and noticed that the whole back window area was spayed with oil. Well I looked down at the back of my diff and saw a big 1/2" hole at the top left of the housing!!!!
The next day after work I pulled out the third member and found what had cause the hole. About 4to 5 of the ring gear bolts had came loose and fallen out!! So I called Allpro and talked to Jay and Mike and the said for me to ship it to them. I talked to them on friday and the are fixing it for free.
I 'am glad to see some aftermarket off road vendors are standing behind there products.Sorry no pictures off the carnge to put up here I took the pichures with my 35mm camrea( I don't own a digital camrea yet).
I should have I back on tuesday 8/10.
Greg
P.S. Hole in the diff housing was welded close by a buddy at his work. Cost one 12pk of beer!
#3
Contributing Member
Join Date: Mar 2003
Location: Orange County, CA
Posts: 8,345
Likes: 0
Received 0 Likes
on
0 Posts
Their trail armor is pretty awesome too. Josh (Phalanx) had some pretty good trail carnage from the difficult run this past weekend.
On the easy/moderate trail, I backed into a boulder and heard a pretty sickening *ka-tang*
Minimal damage - loving the bumper
On the easy/moderate trail, I backed into a boulder and heard a pretty sickening *ka-tang*
Minimal damage - loving the bumper
Thread
Thread Starter
Forum
Replies
Last Post
JookUpVandetti
86-95 Trucks & 4Runners
10
09-30-2015 08:58 AM
myotherrideisayoshi
86-95 Trucks & 4Runners
1
09-29-2015 05:41 AM
Toys4parts
86-95 Trucks & 4Runners (Build-Up Section)
2
09-26-2015 01:56 PM