alignment specs, whatcha think??
12-07-2008 | 04:28 PM
#1
Thread Starter
Registered User
Joined: Jan 2005
Posts: 244
Likes: 0
alignment specs, whatcha think??
just got it the truck aligned and they said it's the best they can do. want to see what others think...
parts for my lift
front:
-bilstein 5100 from tundra
-non-trd 4x4 AC tundra coils
rear:
-bilstein 5100 from tundra, changed the lower eye bushing with a 5/8 energy suspension hourglass bushing. $5 for the set from 4wheelparts locally. had to drill out the middle of the bushing to 3/4 to fit the post on the axle
-94 lc coils
-sonoran steel panhard bar
-homemade e-brake extension
wheels are black fj trd wheels w/ 285/75 bfg's at's
parts for my lift
front:
-bilstein 5100 from tundra
-non-trd 4x4 AC tundra coils
rear:
-bilstein 5100 from tundra, changed the lower eye bushing with a 5/8 energy suspension hourglass bushing. $5 for the set from 4wheelparts locally. had to drill out the middle of the bushing to 3/4 to fit the post on the axle
-94 lc coils
-sonoran steel panhard bar
-homemade e-brake extension
wheels are black fj trd wheels w/ 285/75 bfg's at's
Last edited by M threezy; 12-07-2008 at 04:32 PM.
12-08-2008 | 03:32 PM
#3
Contributing Member
Joined: Nov 2004
Posts: 3,572
Likes: 1
From: Upsate SC
Everything looks good to me but the left caster is just barely in the green. You should be fine. If I were doing the alignment as long as I was within specs and it doesn't pull then I'm happy.
Thread
Thread Starter
Forum
Replies
Last Post
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
11-10-2015 07:54 AM
Dale Johnston
86-95 Trucks & 4Runners (Build-Up Section)
11
10-31-2015 11:22 PM
