Yotacool

I have the same problem! I know this is an old thread, but, just to be correct, you need to buy the 6 ohm load eqaulizers. One for each side, and run them from the power wire to the ground wire right?

Also, does this make them dull?? I know 6 ohms isn't much, but.... curious!!'

thanks

4Crawler

iTrader: (3)

The load resistors are put in parallel with the LEDs so have no impact on the current through the LED, so they are the same brightness. I made mine to plug into the trailer wiring connector while I ran the resistors.