99 Taco, Bob and Chop.
#81
Registered User
Thread Starter
Know exactly what you mean buddy !!!
SOOO !! She did awesome on the trail today..
Had nothing in the rear to drag
Ill get to working on some more tacks, more grinding, and get some bondo and ish soon..
In the mean time I need sleep.
SOOO !! She did awesome on the trail today..
Had nothing in the rear to drag
Ill get to working on some more tacks, more grinding, and get some bondo and ish soon..
In the mean time I need sleep.
#82
Registered User
Join Date: Sep 2008
Location: victorville socal
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
looking good Steve! now you gotta figure out some slick low profile bumper. oh and hope the date went well.
Last edited by troyboy162; 07-27-2009 at 03:33 AM. Reason: well wish
#84
Registered User
Thread Starter
TROY !!! Thanks buddy !!
NExt on the list is most likey the rear bumper, so im just trying to invision what exactly I want to do with it..
NExt on the list is most likey the rear bumper, so im just trying to invision what exactly I want to do with it..
#85
Registered User
Lucky ass efi guys... my carburetor wouldnt have any of that
#86
Registered User
Join Date: Mar 2008
Location: Chico, California
Posts: 3,870
Likes: 0
Received 0 Likes
on
0 Posts
NICE EYE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Scuba get that shizzy nizzy done! Ive seen many people get to that point and just lose motivation to finish.
Scuba get that shizzy nizzy done! Ive seen many people get to that point and just lose motivation to finish.
#88
Registered User
you got to love living in the desert being able to drive around with bear metal showing.
frickin around hear with the salt spray from the ocean and the dam humity you can watch the metal rust
frickin around hear with the salt spray from the ocean and the dam humity you can watch the metal rust
#89
Registered User
Thread Starter
96Red, Its actually howing a bit of surface rust, but I keep welding more and hitting it with the flapper wheel so its not a big deal..
Oh, sorry I havent gotten back to you about the hitch, ive had my hands full..
Oh, sorry I havent gotten back to you about the hitch, ive had my hands full..
#90
Registered User
Thread Starter
Updates
Here's the deal..
Last week I realized my first problem, One side of the tailgate wouldnt shut.
Couple days later I realized my second problem, the very rear part wasnt exactly square..
In this picture you can actually see how its not shut all the way..
So I got to some more measuring and realized its 13/16ths " shorter then the other side..
The other day I put in a little spacer peice at the bed rails and called it good till I had more time.
Meet Gappy :
On to Today
Gappy's long lost cousin Filler.
Done for the day.
This is what happens when you pack your cigarettes too much and your too busy grinding welds clean to stop and ash your cig..
Last week I realized my first problem, One side of the tailgate wouldnt shut.
Couple days later I realized my second problem, the very rear part wasnt exactly square..
In this picture you can actually see how its not shut all the way..
So I got to some more measuring and realized its 13/16ths " shorter then the other side..
The other day I put in a little spacer peice at the bed rails and called it good till I had more time.
Meet Gappy :
On to Today
Gappy's long lost cousin Filler.
Done for the day.
This is what happens when you pack your cigarettes too much and your too busy grinding welds clean to stop and ash your cig..
#92
Registered User
Join Date: Dec 2008
Location: Fountain Hills, AZ
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
#93
Registered User
Nice cig scoob
Edit: oh hey are you gonna seal weld that bad boy?
Last edited by algranger; 07-30-2009 at 05:07 PM.
#94
Registered User
Thread Starter
Thanks CR..
Al, Yes of course..
It will all be welded up and will look like the same piece sooner or later, Cant wait to be done with this and start on the bondo..
Al, Yes of course..
It will all be welded up and will look like the same piece sooner or later, Cant wait to be done with this and start on the bondo..
#97
Registered User
Thread Starter
I was waiting for that to happen..
Last week was the last time I've touched it, been way to busy with work and having fun at a friends house while her parents are away. Not to mention I'm 30 miles away from my welder and tools.
I have the whole weekend off this weekend, so Friday I'm gonna head home and grab everything I need and come back down here. Sat morning I'll be up bright and early busting ass on this thing, hoping to get the bondo done sat. evening then wheel Sunday.
So long story short, you'll have your updates this weekend
Stay tuned folks
Last week was the last time I've touched it, been way to busy with work and having fun at a friends house while her parents are away. Not to mention I'm 30 miles away from my welder and tools.
I have the whole weekend off this weekend, so Friday I'm gonna head home and grab everything I need and come back down here. Sat morning I'll be up bright and early busting ass on this thing, hoping to get the bondo done sat. evening then wheel Sunday.
So long story short, you'll have your updates this weekend
Stay tuned folks