3rd Gen. Wheels on a 2nd Gen...
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Provo, UT
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
3rd Gen. Wheels on a 2nd Gen...
I just bought a set of 3rd gen wheels (the split Y design) and put them on my 2nd gen runner. The only problem is that I can't fit the center caps on the front rims. The bearing caps stick out too far. Has anyone swapped rims like this before and is there a solution? I've thought about wheel spacers but don't know if that will take care of it...Thanks in advance...
#4
Contributing Member
Originally Posted by Tools R Us
I put locking hubs on mine and cut the centers of the front caps out.
[IMG]
[IMG]
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
vanion2
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
2
07-29-2015 06:17 PM