3.4 to buggy
#23
In WA eh? I haven't played around with too much with getting the 3.4 cruise in my swaps. But you will need a brake signal, IDL signal, clutch switch signal. The early 3.4 cruise systems used a seperate computer 2 row pins. And the newer units have the ecu built into the cruise control motor.
#26
On other swaps I've done that the recipient had cruise, I was able to just relocate the unit to the passenger side and rework the ball on the cable to a bar so it fits the 3.4 throttle body.
#28
Let me get this straight.
You've spent $90,000 and nearly 2000 man hours building a buggy but you can't wire up a 3.4?
And you plan on driving it to the grocery store?
And the highway?
lol
To get started you should start a thread on Pirate.
Reckon they should have some good advice.
Or you could try posting a help wanted ad.
Looks like your almost there.
Likely will be quite the ride.
You've spent $90,000 and nearly 2000 man hours building a buggy but you can't wire up a 3.4?
And you plan on driving it to the grocery store?
And the highway?
lol
To get started you should start a thread on Pirate.
Reckon they should have some good advice.
Or you could try posting a help wanted ad.
Looks like your almost there.
Likely will be quite the ride.
#30
3.4 engine
86 turbo Trans
T-case 4.7 gears
Rear T-case Dana 300 4.1 gears
King shocks
Rockford Fosgate amps and speakers Kenwood deck
8 strobe kit by extreme lighting
and enough LED lighting to feel like the suns out.
86 turbo Trans
T-case 4.7 gears
Rear T-case Dana 300 4.1 gears
King shocks
Rockford Fosgate amps and speakers Kenwood deck
8 strobe kit by extreme lighting
and enough LED lighting to feel like the suns out.
Thread
Thread Starter
Forum
Replies
Last Post
primordialbeast117
86-95 Trucks & 4Runners
11
12-19-2015 01:23 PM