yotarob2005

I'll have to try & take one in a bit, almost dinner time, then bath / bed time for the kids, then I go outside & work until midnight or 1 am,.....So it will prob be in the AM before I get he pic up.

Kuntryboy

nice schedule hahha but yes i wanna see pics too

92 TOY

wow...you are really wanting this thing done. if you can , snap a pic, the link that was posted before is a good pic too.

yotarob2005

Yeah, LOL especially since I have to be AT work at 7 am. I can't wait to finish this phase of the project so that I can get some sleep. My advise to anyone would be to not attempt this type of project when your kids are 2 & 4 because there are just not enough hours in the day. I am turning 30 years old in a couple of days & I feel like I am 50!

Lumpy

Quit your wining I'm older than that and so is 92 so we don't wanna hear about it...I spent 2 says on my back in #3 limestone changing my clutch...

yotarob2005

I know, it's not age it's lack of sleep catching up with me. I'm pushing as hard as I can to get this thing ready for a weekend of wheeling in Alto Texas this weekend. Made the plans about a month & a half ago, I didn't think it was going to take this long to get it running. I only have today & tomorrow left to work on it, Wednesday I have birthday stuff with my family & Thursday it needs to be on the trailer to head out Friday morning. Talk about down to the wire!!

BTW, the JB weld is drying now! Hope it doesn't leak

Lumpy

Good deal...look for some of that 2 part epoxy that you can drill. I know the local auto store used to have it. Take a tube with you!!!

Lack of sleep and working 10 fold will age you 20 real quick like.

92 TOY

hahahahahhaha

oh, wait.....shaddup

Lumpy

I was not implying anything Jerry; I never said which of us was older...now did I???





But our trucks are the same age

92 TOY

yeah, well ok.

i'm older.

yotarob2005

Of course things did not go as planned last night . I got the old load sensing proportioning valve removed & ran all of the neccesary brake lines. The double flaring tool that I rented was a piece of crap, but I am pretty happy with how it all came out. Like most of the other who have done this I decided to put my new adjustable proportioning vavle in the engine compartment by the master cylinder instead of the rear frame rail for easier adjustment. Besides fighting the flare tool, everything went pretty smooth & came out nice untill I went to remove the bypassed brake & didn't have the correct plug. I guess my plan is to take one of the old brake line fittings & fill the trough hole with weld to plug it off. At any rate I should be able to take care of that issue in a matter of 5 minutes, then the brakes will just need to be bleed. Here are a couple of the pics.

I decided not to mount the new proportioning valve because it would have been a pain in the neck to run the new brake lines, but they are so rigid & the proportioning valve is so light that it doesn't move at all.



This is how I did the rear line, 1 line was eliminated & this one was redirected from the old proportioning valve directlly to the rear brakes. I would like for this line to be a little higher & tighter but it was a pain to bend without kinking.



Finally this is where the other end of the eliminate brake line tied into the equasion in the passenger side wheel well. You can see where I need to put the plug.



All in all it doesn't look like much but took me a couple of hours to do. I think this is going to be a good fix for my brake problem & a nice upgrade aswell

92 TOY

very good.

yes i know well about those projects that took a long time but don't look like much.

good job bud.

yotarob2005

Thanks, since I am missing that plug & couldn't bleed the brakes I moved on & took care of a couple other details. Put the fuel tank skid back on & the front drive shaft & sheild is back in.

I am somewhat ashamed to say this but I bought some new windsheild wiper blades in case I get a little mud on the trail but I couldn't put them on . I don't think that the blade frames are replaceable, that you can only use wiper inserts. I guess I have to return them & try to get a different style??

92 TOY

ok now you're gonna make me go down and look at the 88....stand-by.

92 TOY

looks like ya just un-do these screws......something more complicated with your's???? shouldn't be....

yotarob2005

Thanks 92 Toy, but mine are totally different, it doesn't look like they come off at all & only the insert is replaceable. I might do a little cutting & go for something closer to what you have.


EDIT: you have me second guessing myself now! I will take another look at mine before I return the ones I have. I highlly doubt that I am that blind but we will see.

92 TOY

that's what i'm here for....to make people stop in their tracks and say WTH?

Lumpy

My wipers are the same as well...on both the 92 and the 95. Don't recall what the 88 has.

As for the leak try some of that other goop on there...I wish I could remember what it was called. you take the stuff and mix it like playdough and then stuff it in the hole. Someone has to know what I'm talking about.

Lumpy

Something like this...



One great product to handle two difficult repair jobs! This 10 minute repair epoxy is a steel epoxy in stick form that makes permanent repairs. Simply cut off the appropriate amount of product needed for the job, knead and apply to damaged fuel tank or radiator. Epoxy cures in 10 minutes. Seals small holes, leaks, and weak seams. Hardens like steel.

http://www.retrocycle.com/CustomChro...r___Epoxy.html

yotarob2005

Thanks again Lumpy. That is what I should have used instead of the JB weld! I will see if they have some when I go to the parts store at lunch so I can carry it for emergencies.