xxxtreme22r's 1987 Pickup Build-Up Thread
#1141
Registered User
Thread Starter
1-piece weber adapter still working flawlessly.
Put new valve core in tire a little while back, it worked longer this time, but the dang tire is still going flat on me.
Probably mud/pebbles in bead again.
Still haven't gotten the pics of the hi-lift rebuild up yet.
Put new valve core in tire a little while back, it worked longer this time, but the dang tire is still going flat on me.
Probably mud/pebbles in bead again.
Still haven't gotten the pics of the hi-lift rebuild up yet.
#1142
YotaTech Milestone-Two Millionth Post
can't imagine how you could get mud / pebbles/ bone/ gravel / grass / cement / other vehicles / stuck in the bead. yup. no clue....hehehehehe
#1144
YotaTech Milestone-Two Millionth Post
pffft.
do those new tires help that much in the mud pit? I guess they do, but you have to air down and you are gonna always have the problem of crud getting in there. I have 4 extra 31's, 2 in really good shape and 2 not-so-good. find some rims, throw them on, mud wit those and crawl with the ones you have or both or neither. what?
do those new tires help that much in the mud pit? I guess they do, but you have to air down and you are gonna always have the problem of crud getting in there. I have 4 extra 31's, 2 in really good shape and 2 not-so-good. find some rims, throw them on, mud wit those and crawl with the ones you have or both or neither. what?
#1145
Registered User
Thread Starter
Bah mud season is over, doubt I will get to go wheeling by the end of the year, got another spot starting on frame as well. Otherwise, I'd probably be going to RC this weekend.
#1147
Registered User
Thread Starter
4.88 Front Courtesy of 3MPH Toy
Bout time I find a good deal on something. Now to just find a matching rear. I will have to convert the ADD shaft on it using my current one.
Time to start doing some reading. Should be simple enough. https://www.yotatech.com/forums/f116...l-tube-225215/
Last edited by xxxtreme22r; 10-15-2011 at 02:35 PM.
#1150
Registered User
Thread Starter
That front diff is gonna be easy. The rear not so sure. lol. And no RC this time for me Chef, got another sketchy section of the frame to worry about.
#1152
YotaTech Milestone-Two Millionth Post
so. this place is close. he's a toyota nut and we never met him. he has fab skills and we need some welding classes....got it.
#1155
Registered User
Thread Starter
wont work 86-95 leaf sprung axles were 58" earlier axles were 55". Unless your trying to talk me into an SAS, in that case I bought that 4.88 for nothin lol.
#1156
YotaTech Milestone-Two Millionth Post
fuggettabowtit
nah...just was doing some early morning searching.
keep coming up with lots of parts in Elizabethtown which is where I got my door and the guy goes on ebay (and here i think) as "toyotapartsdude or toyotafoolish" ...i think it's "partsdude".
other guy on here who may have a line on stuff is "drptmazda?"....i bought wheels off of him in Allentown and he knew alot of stuff. he was on Joe's thread a few times too.
nah...just was doing some early morning searching.
keep coming up with lots of parts in Elizabethtown which is where I got my door and the guy goes on ebay (and here i think) as "toyotapartsdude or toyotafoolish" ...i think it's "partsdude".
other guy on here who may have a line on stuff is "drptmazda?"....i bought wheels off of him in Allentown and he knew alot of stuff. he was on Joe's thread a few times too.
#1158
Registered User
Thread Starter
I did send that guy an email though and asked what gearset was in the 3rd he has. I'd be willing to bet though it's either a 4.10 or a 4.30.
Last edited by xxxtreme22r; 10-16-2011 at 04:02 AM.
#1159
Registered User
Thread Starter
the guy emailed back with an unexpected diff ratio. Wonder if it's from a 4x4 or not because it doesn't sound right.
Only problem according to 4x4wire: http://www.4x4wire.com/toyota/faq/parts/
But 4x4wire never covers 2wd's for the most part.
its a 3.90 in the 83, also have a 4.10 out of a 92 rear...
3.90s only available in 1981, 8" drums.
#1160
Registered User
Join Date: Jun 2010
Location: Orwigsburg, PA
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts